645092
7
Zoom out
Zoom in
Previous page
1/11
Next page
POWX0495 EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
7.5 Adjusting the dust extraction hood (Fig. 6)
Adjust the dust extraction hood (2) so dust or sparks are not directed at the user.
The dust extraction hood (2) can cover the grinding spindle from various angles. Use the
locking grooves (12) for this purpose.
Following installation, rotate the dust extraction hood (2) toward the handle (6) according
to the application and the work piece. The dust extraction hood (2) will lock into place in
several positions.
7.6 External extraction
Explosion hazard! A special dust extractor must be used for explosivedust /
air mixtures.
Fire hazard due to sparking! Do not use dust extraction when working on
metal.
Fire hazard! Using power tools which can be connected to a vacuum using
a dust extraction poses a fire hazard! Unfavourable conditions, e.g.
Sparking - when grinding metal or metal pieces in wood - can ignite wood
dust inside the vacuum bag. This can particularly occur if the wood dust is
mixed with paint particles or other chemicals and the ground product is hot
after long work periods. Therefore be sure to avoid the ground materials
and the device from overheating and always empty the vacuum bag before
taking breaks.
Wear a dust mask!
7.6.1 Connecting the dust extraction hose
Slide the vacuum adapter (F) into the connecting piece (3) (Fig. 7).
Slide the hose from a reliable dust extraction (e.g. a workshop vacuum) into the vacuum
adapter (F).
7.6.2 Removing the dust extractor hose
Pull the hose out of the dust extraction unit.
8 OPERATION
Risk of injury! Always unplug from the mains before working on the
sanding brush.
Firmly hold the power tool with both hands whilst working and ensure a solid stance.
Holding the power tool with both hands is safer.
Note the mains voltage! The voltage of the power source must correspond with the
specifications on the type plate of the power tool.
8.1 Switching on / off
To switch on the power tool, slide the on / off switch (7) forward so the switch shows ‘1’.
To save power, only switch on the power tool when in use.
To switch off the power tool, slide the on / off switch (7) back so the switch shows “0“.
Check the grinding tool before use.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0495 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0495

Powerplus POWX0495 User Manual - German - 12 pages

Powerplus POWX0495 User Manual - Dutch - 12 pages

Powerplus POWX0495 User Manual - French - 12 pages

Powerplus POWX0495 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info