645092
8
Zoom out
Zoom in
Previous page
1/11
Next page
POWX0495 EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
The grinding tool must be properly installed and rotate freely. Perform a test run of at least
1 minute without load. Do not use damaged, untrue vibrating grinding tools. Damaged
grinding tools could burst and cause injuries.
8.2 Selecting the grinding tool
Select the grinding tool according to the shape of surface to be worked on and the material to
be sanded. Match the grit with the desired material removal.
Grinding tool
Surface shape
Sanding sleeve
Straight
Flat
medium
80
Fine
120
Extra fine
240
Lamella roll (60 mm)
Curved
Uneven
Medium
80
Fine
120
Extra fine
240
Lamella roll (10 mm)
Fluted
Medium
80
fine
120
8.3 Working instructions
The removal and the surface quality are essentially determined by the choice of grinding
tool, the speed setting and the pressure applied.
Only grinding tools in good working order will yield good grinding performance and be
easy on the power tool.
Only use original grinding accessories.
8.4 Pre-setting the speed
Use the speed wheel (8) to also preselect the required speed during operation.
The ideal belt speed varies by work piece or material being worked. Always determine the
respective best speed yourself on a test piece. The following table contains non-binding
values to aid you with selection.
The specifications in the following table are recommended values:
Use
Grit
(rough grinding/ finishing)
Speed setting
Sanding back lacquer
180/240
2/3
Repairing lacquer
120/240
4/5
Removing lacquer
40/60
5
Softwood
40/240
5/6
Hardwood
60/240
5/6
Veneer
180/240
2-4
Aluminium
80/240
4/5
Steel
40/240
5
Removing rust from steel
40/120
6
Stainless steel
80/240
5
stone
80/240
5/6
After working at slow speeds for extended periods you should allow the power tool to run at
maximum speed in idle for approx. 3 minutes to cool down.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0495 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0495

Powerplus POWX0495 User Manual - German - 12 pages

Powerplus POWX0495 User Manual - Dutch - 12 pages

Powerplus POWX0495 User Manual - French - 12 pages

Powerplus POWX0495 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info