676337
8
Zoom out
Zoom in
Previous page
1/10
Next page
POWX04760 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
8.6 To replace the hook and loop sponge pad (8):
The sponge pad must be perfectly flat to get good sanding results. If it is deformed or
damaged it will cause very uneven sanding. Always replace it when damaged.
8.7 How to use the tool
Effective control of this powerful tool requires two-handed for maximum safety and control.
It is vitally important to keep stable footing at times, especially when scaffolding or stilts.
8.8 Polish the ceiling easily (Fig. 9)
Use the blocking pin to fix the head of the drywall sander when you polish the ceiling. Put the
blocking pin in the hole.
9 SANDING OPERATIONS
Once the machine and vacuum cleaner are set up and all safety measures and equipment
are in place, begin by turning on the vacuum cleaner and then the machine. (If you are
using a vacuum cleaner with integrated switching, then simply turn the machine on.)
Begin sanding and carefully contact the work surface as lightly as possible-just enough to
keep the sanding head flat against the surface.
The joist in the sanding head allow the sanding disc (7) to follow the contours of the work
surface.
The best technique is to use overlapping sweeps and keep the head in constant motion.
Never stop too long in any one place or there will be swirl marks. With experience it will be
very easy to create excellent results.
NOTE: Ensure that the sandpaper (7) you are using is suited to the task,
Overly coarse grit paper may remove material too quickly to control. While
overly fine grit paper may clog too often and not shape down the surface.
CAUTION: Take care to avoid sharp projections and nails, etc. This will wipe
out the sandpaper and probably damage the sponge pad as well.
10 CLEANING AND MAINTENANCE
10.1 Keep tool clean
Periodically blow out all air passages with dry compressed air. All plastic parts should be
cleaned with a soft damp cloth. NEVER use solvents to clean plastic pats. They could possibly
dissolve or otherwise damage the material.
Wear safety glasses while using compressed air.
Clean the vacuum swivel connector as too much dust will keep it from turning freely.
10.2 The carbon brushes (13)
The carbon brushes are a normal wearing part and must be replaced when they reach their
wear limit.
10.3 Carbon brushes replacement
Unscrew the brush holder caps using a cutting tool.
Extract the worn brushes and replace them with new ones.
Lock the brush-holder caps.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX04760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX04760 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX04760

Powerplus POWX04760 User Manual - German - 12 pages

Powerplus POWX04760 User Manual - Dutch - 11 pages

Powerplus POWX04760 User Manual - French - 11 pages

Powerplus POWX04760 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info