676337
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWX04760 EN
Copyright © 2017 VARO P a g e | 7 www.varo.com
7.3 To install the vacuum cleaner hose (Fig. 4)
Unplug the machine.
Plug the vacuum cleaner hose into the adaptor for dust collection.
Ensure that you have a bag installed in your vacuum cleaner which is approved and rated for
drywall dust.
Use an adaptor if the devices cannot be connected
Push the adaptor onto the extraction hose by using a screwdriver
WARNING: Failure to use an approved dust bag in your vacuum cleaner will
increase the level of airborne dust in the work area. Prolonged exposure to
such dust may cause respiratory harm
7.4 Install the LED light (Fig. 5)
Install the LED light on the proper place with the delivered screws.
The LED light activates from the moment you activate the machine.
8 OPERATION
8.1 Starting and stopping tool
Make sure that the power circuit voltage is the same as that shown on the specification plate
of the machine and that switch (4) is “OFF” before connecting the tool to the power circuit.
8.2 Switching the machine on and off (Fig. 6)
Start the machine at the lowest rotational speed (setting 1)
8.2.1 Switching on
Press the switch lock (4a) at the back of the on-off switch (4)
The switch is locked
8.2.2 Switching off
Press the switch lock (4a) at the back of the on-off switch (4)
The lock of the switch is released.
8.3 Adjusting the rotation speed (Fig. 7)
The speed of the machine is variable to suit different tasks. It can be adjusted from 0 min
-1
up
to 1200 min
-1
by using the thumb wheel (12). Turn in the counter clockwise direction to
increase the speed and in the clockwise direction to decrease the speed. Generally, you
should use the higher speed for fast stock removal and the lower speed for more precise
control.
8.4 Extend the drywall sander (Fig. 8)
Push the tube button
Extend the tube
Release the button, the button will lock the tube.
8.5 To install a sandpaper disc:
Unplug the machine.
Peel away the worn out sandpaper disc (7), leaving the sponge backing pad in place.
Carefully press the new sandpaper disc into place. It will be held securely by the hook and
loop backing.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX04760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX04760 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX04760

Powerplus POWX04760 User Manual - German - 12 pages

Powerplus POWX04760 User Manual - Dutch - 11 pages

Powerplus POWX04760 User Manual - French - 11 pages

Powerplus POWX04760 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info