676337
6
Zoom out
Zoom in
Previous page
1/10
Next page
POWX04760 EN
Copyright © 2017 VARO P a g e | 6 www.varo.com
Important: after completing sanding, switch off the switch and wait for the coasting sanding
head to stop completely before putting the tool down.
Never operate the tool in an area with flammable solids, liquids, or gases. Sparks from the
commutator / carbon brushes could cause a fire or explosion.
There are certain applications for which this tool was designed. The manufacturer strongly
recommends that this tool can not be modified and / or used for any application other than
for which it was designed.
Use the machine with both hands at all times. Loss of control can cause personal injury.
Keep power supply cord clear from the working range of the machine. Always lead the
cable away behind you.
Immediately switch off the machine if unusual vibrations or if other malfunctions occur.
Check the machine in order to find out the cause.
The dust that arises when working with this tool can be harmful to health. Use a dust
absorption system and wear a suitable dust protection mask and remove deposited dust
with a vacuum cleaner.
6.1 Electrical connection
The network voltage must conform to the voltage indicated on the tool name plate. Under no
circumstances should the tool be used when the power supply cable is damaged. A damaged
cable must be replaced immediately by an authorized Customer Service Centre. Do not try to
repair the damaged cable yourself. The use of damaged power cables can lead to an electric
shock.
7 ASSEMBLY
7.1 Assembling the machine (Fig. 3)
Fold the drywall sander and guide the locking screw into the slot and oress down the locking
lever.
When the screw cannot be guided into the slot, correct the screw length.
Loosen the nut and screw the locking screw in/out
Retighten the nut
The drywall sander is only properly locked when the locking lever is
pressed all the way down.
7.2 The brush bristles on the edge of the sanding plate cover (2)
The brush bristles (9) on the edge of the sanding plate cover (2)
serve two purposes, they keep the sanding disc (7) properly
aligned with the work surface without gouging and they also
help the efficiency of the dust collection by the vacuum cleaner.
These brush bristles (9)will wear with continued use.
The sanding plate cover (2) should be replaced when the
bristles (9) are too worn to ensure effective dust collection and
stabilization of the sanding head.
To replace, hold the centre bolt from turning with a slot head
screwdriver and unscrew the sanding plate. Remove the
vacuum hose (3) and lift sanding plate cover away.
Replacement is the opposite of removal. Entrust all repairs to an
authorized service centre.
NOTE: Only use sandpaper discs (7) which fit properly and which are
designed for vacuum use.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX04760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX04760 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX04760

Powerplus POWX04760 User Manual - German - 12 pages

Powerplus POWX04760 User Manual - Dutch - 11 pages

Powerplus POWX04760 User Manual - French - 11 pages

Powerplus POWX04760 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info