Manual Parkside PSBM 500 B3 - IAN 102531 (page 10 of 80) (English, German, Danish, French, Swedish, Finnish)

595357

Zoom out

Zoom in

1/80

GB IE

Residual risks

Even if properly operating and handling

this electric tool, some residual risks will

remain. Due to its construction and build,

this electric tool may present the following

hazards:

a) Injuries caused by moving parts;

b) Ear damage if working without ear

protection;

c) Lung damage, if suitable respiratory

protection is not worn;

d) Damage to your health caused by

swinging your hands and arms when

operating the appliance for longer pe-

riods of time or if the unit is not held or

maintained properly.

Warning! During operation, this

electric tool generates an electro-

magnetic eld which, under certain

circumstances, may impair the

functionality of active or passive

medical implants. To reduce the risk

of serious or lethal injuries, we rec-

ommend that persons with medical

implants consult their doctor and

the manufacturer of their medical

implant before operating the ma-

chine.

Mounting

Pull out the power plug before car-

rying out any work on the equip-

ment. There is a risk of electrocution

or of injury from moving parts.

Mounting/pivoting the

additional handle

Do not use the device with-

out the additional handle. It

provides additional hold and

reduces the risk of injury.

1. Loosen the buttery screw (3) on

the additional handle (5).

2. Insert the additional handle (5)

over the keyless chuck (4) on to

the device.

3. Pivot the additional handle (5)

into the desired position (see

smaller image).

4. Tighten the buttery screw (3).

The additional handle is equally

suited for right and left-handed per-

son.

Mount/set depth stop

The boreholes can be precisely drilled to

an exact drilling depth x using the depth

stop.

1. Loosen the buttery screw (3) on

the additional handle (5).

2. Use the depth stop (2) in the ad-

ditional handle (5).

3. Place the tip of the depth stop

(2) to the desired drilling depth x

behind the tip of the drill.

4. Tighten the buttery screw (3).

I was drilling concrete for to long and the Parkside PSBM 500 b3 stopped to run. Is there a fuse inside ? Is there a thermal switch inside ? Is the MOSFET replaceable ?
Submitted on 22-11-2020 at 15:34
Reply Report abuse
I was drilling concrete for to long and the Parkside PSBM 500 b3 stopped to run. Is there a fuse inside ? Is there a thermal switch inside ? Is the MOSFET replaceable ? Submitted on 22-11-2020 at 15:33
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBM 500 B3 - IAN 102531 in the language / languages: English, German, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 4,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSBM 500 B3 - IAN 102531 Manual

Product: