595357

Parkside PSBM 500 B3 - IAN 102531 Manual

9
Zoom out
Zoom in
Previous page
1/80
Next page
9
GB IE
ments, changing accessories, or
storing power tools. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
• Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
• Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool’s
operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
• Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
• Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
Service
• Have your power tool serviced
by a qualied repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Safety information for
drilling machines
• Wear ear protection during im-
pact drilling. The exposure to noise
can cause hearing loss.
• Use the additional handles de-
livered with the device. The loss of
control can result in injuries.
• Hold the device by the insulated
gripping surfaces when per-
forming work in which the cut-
ting tool may come into contact
with hidden wiring or its own
cord. Contact with a live wire can also
cause a charge in metal parts of the
device and result in an electric shock.
• Use suitable detectors in order
to nd hidden supply lines or
ask the local utility company.
Contact with electrical cables
can lead to electric shock and
re, contact with a gas pipe can
result in an explosion. Damage to
a water pipe can lead to property dam-
aged and electric shock.
• Keep hands away from rotating
parts. Wait until the power tool
has stopped before placing it
down. Risk of injury!
• Avoid contact with the tool in-
sert or the component part im-
mediately after processing. The
parts may be hot and cause burn inju-
ries.
• Immediately switch off the
power tool if the tool insert is
blocked due to overloading or
tilting of the component part. The
loss of control can result in injuries.
• Secure moving component part
with clamping devices. A hand
held tool can slip and endanger your
safety.
… 9 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-psbm-500-b3---ian-102531

Reset search

  • I was drilling concrete for to long and the Parkside PSBM 500 b3 stopped to run. Is there a fuse inside ? Is there a thermal switch inside ? Is the MOSFET replaceable ?
    Submitted on 22-11-2020 at 15:34

    Reply Report abuse

  • I was drilling concrete for to long and the Parkside PSBM 500 b3 stopped to run. Is there a fuse inside ? Is there a thermal switch inside ? Is the MOSFET replaceable ? Submitted on 22-11-2020 at 15:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBM 500 B3 - IAN 102531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBM 500 B3 - IAN 102531 in the language / languages: English, German, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info