631680
3
Zoom out
Zoom in
Previous page
1/17
Next page
Assemble the OPU station and connect to a
DHCP-enabled router
Assemble the system according to the provided picture. It
is recommended that the OPU be placed on a 3-5ft (0.91-
1.52m) high platform.
Note: Once the OPU is up and running, to establish proper connection to it,
power up the remaining devices within 5 feet of the OPU. When connection
is established and working, the devices can be moved to their desired
locations.
Activation completed
When you see the "System is ready!" message, your system
is ready for use.
Note: Your IP Camera status will be updated after 10 minutes.
Power up the IP Camera
Plug the IP Camera into an outlet within 5 feet of the OPU
to establish connection. Once connection is established
and working, the IP Camera can be moved to its desired
location.
Note: Should the placement of the camera cause the image to be upside-
down, use the Flip feature in the App to correct this matter. Video > Single
Video Mode > Image Setting.
Place the Door/Window Sensor
Each Door/Window Sensor set consists of two pieces. Take
the larger piece and with slight force, push the small tab on
the back plate outward and slide the back plate upward.
Remove the back plate and insert a battery into each Door/
Window Sensor set. Apply the double-sided tape to each
piece. It is recommended that the Door/Window Sensor be
mounted in a vertical/upright position.
Power up the Siren
Plug the Siren into an outlet within 5 feet of the OPU to
establish connection. Once connection is established and
working, the Siren can be moved to its desired location.
Your Siren comes with a backup battery pre-installed. To
make use of the backup battery, pull and remove the clear
plastic strip to initiate battery contact.
The camera can be
moved and mounted
after the initial activation.
Note: When the activation process
cannot be completed normally, the
App will ask you to scan the OPU's
QR code, located on the back of the
OPU, to continue.
Start devices activation on the app
Tap the"Activate Now" button. (Activation process takes
approximately 2 minutes)
Internet
Router
(Not included)
1/4 de pouce
(0,64 cm)Max
Montez le capteurde porte
Montez le capteur de Fenêtre
(G) Installaon des baeries des
capteurs de porte/fenêtre
1/4 de pouce
(0,64 cm)Max
Montez le capteurde porte
Montez le capteur de Fenêtre
(G) Installaon des baeries des
capteurs de porte/fenêtre
1/4 de pouce
(0,64 cm)Max
Montez le capteurde porte
Montez le capteur de Fenêtre
(G) Installaon des baeries des
capteurs de porte/fenêtre
Note: For the Door/Window Sensor, it does not matter
which piece you place on the frame and which piece
you place on the moving part. To creat proper contact,
ensure the tops of the two pieces line up. The Spacer is
used in situations where the smaller piece needs to be
elevated to the larger piece to ensure proper contact.
Place the Motion Sensor
Lift the top tab to remove the cover and install the battery
into the Motion Sensor. For maximum coverage, the
sensor should be placed in the corner of the room to be
monitored and no more than 7 feet above the ground. The
Motion Sensor is most eective in areas such as hallways
and entry points where possible intruders will have to pass
through.
Note: Once Motion sensor alarms, it will start
to count 3 minutes, and count over again if
any movement detected in this period .The
next alarm will be triggered only when no
movement is detected within 3minutes.
(H) Installaon des baeries
du capteur de mouvement
Montez le Capteur
de Mouvement
(H) Installaon des baeries
du capteur de mouvement
Montez le Capteur
de Mouvement
Congratulations!
You have successfully installed
the security system!
Smart PlugPanic ButtonRemote
Control
Siren Motion Sensor
Door/Window
Sensor
IP Camera
(E)
(F)
(A)
( I )
(D)
(C)
(B)
Add-on Devices
STEP
3
STEP
7
STEP
4
STEP
8
STEP
9
STEP
5
STEP
6
Installation Guide
(Sample of QR Code)
1/4 inch Max
Mount Door Sensor Mount Window Sensor
(G) Door/Window Sensor
Battery Installation
(H) Motion Sensor Battery
Installation
Mount Motion Sensor
Less than 7 Feet
Installationsanleitung Step Guide
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oplink TripleShield at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oplink TripleShield in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oplink TripleShield

Oplink TripleShield User Manual - English - 128 pages

Oplink TripleShield User Manual - English - 27 pages

Oplink TripleShield Installation Guide - English - 1 pages

Oplink TripleShield User Manual - German, Dutch - 128 pages

Oplink TripleShield User Manual - Dutch - 26 pages

Oplink TripleShield User Manual - French, Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info