Manual One for All URC 4081 (page 13 of 19) (English)

492775

Zoom out

Zoom in

1/19

2524

PROGRAMMING THE MASTER POWER KEY

FOR ALL ON/OFF

With the One For All 4-Device Video Expert,you can

program the M. POWER key to turn your TV,VCR,DVD,

and Cable (or Satellite) components on and off with the

press of one button.

1. On the remote control,press and hold SET

until the LED blinks twice,then release SET.

2. Enter 9 - 9 - 5.The LED will blink twice.

3. Press M.POWER once.

4. Enter the following sequence*:

a. Press TV once.

b. Press VCR once.

c. Press DVD once.

d. Press CBL/SAT once.

Press and hold SET until the LED blinks twice,

then release SET.

6. Now,when you press M.POWER once, the

remote control will direct power to your TV,

VCR,DVD (or LD) player,and Cable/Satellite

component and leave the remote control in the

TV mode.

* NOTE:If you do not want all of your equipment to power up

all of the time, you can shorten step 4 to include only those

devices you want to turn on or off. For example, to just power

up your TV and DVD (or LD) player, enter the following

sequence for step 4:

a. Press TV once.

b. Press DVD once.

Now when you press M.POWER once, the One For All 4-Device

Video Expert remote control will only direct power to your

DVD (or LD) player and TV,and still leave the remote control

in the TV mode.

CHECKING THE CODES

If you have set up the One For All 4-Device Video Expert

remote control using the Searching For Your Code proce-

dure,you may need to find out which four-digit code is

operating your equipment.For example,to find out which

code is operating your TV:

1. Turn on your TV.

2. On the remote control,press TV once.

Press and hold SET until the LED blinks twice,

then release SET.

3. Enter 9 - 9 - 0.The LED will blink twice.

4. To view the code for the first digit,press 1 once.

Count the number of LED blinks (e.g.,3 blinks

= 3) and write down the number in the left-

most TV Code box below.

NOTE:If a code digit is “0”,the LED will not blink.

5. Repeat step 4 three more times for remaining

digits.Use 2 for the second digit,3 for the third

digit,and 4 for the fourth digit.Finish writing

down the code in the TV Code boxes below.

6. To check for the codes of your other compo-

nents,repeat steps 1 through 5,but substitute

the appropriate key (i.e.,DVD,VCR,or CBL/SAT)

for the (DVD/LD,VCR,or Cable/Satellite) com-

ponent you are checking.Write down the codes

in the appropriate boxes below.

TV Code

DVD (or LD) Code

VCR Code

Cable/Satellite Code

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 4081 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC 4081 Manual

Product: