492775
14
Zoom out
Zoom in
Previous page
1/19
Next page
2726
CHANGING VOLUME LOCK
The One For All 4-Device Video Expert remote control is
preset to control the volume of a component through
your TV.
If your TV is not remote controllable,or if you would like
the volume to be controlled by a different component,you
can change the Volume Lock setting to control a volume
through a non-associated mode (e.g.,through the cable in
the TV mode).
To change Volume Lock to the CBL/SAT mode:
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 9 - 3 and then press CBL/SAT once.
The LED will blink twice.
3. Now,whenever you press VOL +,VOL –,or
MUTE on the remote control,the volume will be
controlled by your Cable Converter or Satellite
Receiver.
To change Volume Lock to the VCR mode:
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 9 - 3 and then press VCR once.
The LED will blink twice.
3. Now,whenever you press VOL +,VOL –,or
MUTE on the remote control,volume will be
controlled by your VCR.
To change Volume Lock to the DVD mode:
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 9 - 3 and then press DVD once.
The LED will blink twice.
3. Now,whenever you press VOL +,VOL –,or
MUTE on the remote control,volume will be
controlled by your DVD (or LD) player.
RE-ASSIGNING DEVICE KEYS
The One For All 4-Device Video Expert remote control
can be set up to control a second TV or VCR, or any com-
bination of four video components.For example,to have
the unit control a TV,a Cable Converter,and two VCRs,
you will need to re-assign the unused DVD key to operate
the second VCR as follows:
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 9 - 2.The LED will blink twice.
3. Press VCR once,then press DVD once.The LED
will blink twice.
4. Program the DVD key as a second VCR.See
Programming VCR Control on page 12.
To re-assign other device keys,repeat steps 1 through 4 by
substituting the key sequence from the following chart for
a desired component:
To Re-Assign Perform Key Sequence
VCR as 2nd TV key: SET - 9 - 9 - 2 - TV - VCR
VCR as 2nd DVD key: SET - 9 - 9 - 2 - DVD - VCR
VCR as 2nd Cbl/Sat key: SET - 9 - 9 - 2 - CBL/SAT - VCR
VCR back to VCR: SET - 9 - 9 - 2 - VCR - VCR
DVD as 2nd TV key: SET - 9 - 9 - 2 - TV - DVD
DVD as 2nd VCR key: SET - 9 - 9 - 2 - VCR - DVD
DVD
as 2nd
Cbl/Sat
key:
SET - 9 - 9 - 2 - CBL/SAT - DVD
DVD
back to
DVD
:
SET - 9 - 9 - 2 - DVD - DVD
CBL/SAT as 2nd TV key: SET - 9 - 9 - 2 - TV - CBL/SAT
CBL/SAT as 2nd DVD key: SET - 9 - 9 - 2 - DVD - CBL/SAT
CBL/SAT as 2nd VCR key: SET - 9 - 9 - 2 - VCR - CBL/SAT
CBL/SAT back to CBL/SAT: SET- 9 - 9 - 2- CBL/SAT- CBL/SAT
Upon completion of a re-assignment,the LED will blink
twice to confirm your selection.At that time,you will also
need to program the remote control to control the new com-
ponent (see previous sections on Programming VCR Control,
Programming Cable Converter or Satellite Receiver Control,or
Programming DVD Player Control).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 4081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 4081 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info