492775
17
Zoom out
Zoom in
Previous page
1/19
Next page
3332
USING THE VIDEO CONFIGURATION MODE
The One For All 4-Device Video Expert remote control
includes a powerful Video Configuration feature that
allows you to combine the most used functions of your
Audio/Video equipment into one V.CONFIG mode. The
features you can combine are organized into five groups
and can be defined by specific modes as follows:
Function Groups
Function Group 1 Transport Keys (Play,Stop,Fast
Forward, Rewind, Pause, Record, Forward Scan,and
Rewind Scan)
Function Group 2 Volume Keys (Volume Up,Volume
Down,and Mute)
Function Group 3 – Channel Keys (Channel Up,
Channel Down,Digits 0-9,Enter,Previous Channel,
Sleep,and Display)
Function Group 4 – Menu Keys (Menu,Up,Down,Left,
Right,and Select)
Function Group 5 – PIP Keys (Picture-In-Picture,Swap,
and Move)
Component (Mode) Groups
Component Group 1 – VCR and DVD
Component Group 2 – TV,VCR,and Cable/Sat
Component Group 3 – TV,VCR,and Cable/Sat
Component Group 4 – TV,VCR,Cable/Sat,and DVD
Component Group 5 – TV,VCR,and Cable/Sat
To enable the Video Configuration feature,you’ll need to
perform the following programming sequence:
1. On the remote control,press V.CONFIG once.
2. Press and hold SET until the LED blinks twice,
then release SET.
3. Enter 9 - 7 - 9.The LED will blink twice.
At this point, you’ll assign Component Groups to Function
Groups up to five times,depending on how many combi-
nations you need.You can perform any of the following
steps in any order,as long as you finish the sequence with
step 9.
4. Select a key from Component Group 1 (i.e.,VCR
or DVD) and press it once.Press PLAY to assign
Function Group 1 (i.e.,the transport keys).The
LED will blink twice.
5. Select a key from Component Group 2 (i.e.,TV,
VCR,or CBL/SAT) and press it once.Press VOL+
to assign Function Group 2 (i.e.,the volume
keys).The LED will blink twice.
6. Select a key from Component Group 3 (i.e.,TV,
VCR,or CBL/SAT) and press it once.Press CH+
to assign Function Group 3 (i.e.,the channel
keys).The LED will blink twice.
7. Select a key from Component Group 4 (i.e.,TV,
DVD,VCR,or CBL/SAT) and press it once.Press
MENU to assign Function Group 4 (i.e.,the
menu keys).The LED will blink twice.
8. Select a key from Component Mode Group 5
(i.e.,TV,VCR,or CBL/SAT) and press it once.
Press PIP to assign Function Group 5 (i.e.,the
PIP keys).The LED will blink twice.
9. To lock in the Video Configuration,press SET
until the LED blinks twice,then release SET.
An Example Video Configuration
From one mode,you would like to play your DVD,use the
Volume control on the TV,change channels on your Cable
Box,control the Menu on the Cable Box,and use the PIP
feature of your TV. To program this Video Configuration
you would perform the following steps:
1. On the remote control,press V.CONFIG once.
2. Press and hold SET until the LED blinks twice,
then release SET.
3. Enter 9 - 7 - 9.The LED will blink twice.
4. Press DVD once and then press PLAY.The LED
will blink twice.
...continued on next page
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 4081 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 4081 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info