43
the 1-cup button (fig. 1/G). A cup
of coffee is now brewed without
grinding.
Note: If the pre-ground coffee
chamber is left open by accident
or no button is pressed after
coffee is added, the machine will
automatically ask to be rinsed out
a minute after the lid is closed.
Press the flashing rinse button (fig.
1/O) to confirm, and the machine
will be rinsed out via the coffee
spout. It is then operational again.
Caution: The pre-ground coffee
chamber is not a storage container.
Never add more than one measure
at a time to the chamber, and use
only fresh grinded or vacuum-
packed coffee ground. Do not use
instant coffee powder.
3.6 Drawing hot water
➔ Hold a cup under the steam / hot
water jet (fig. 1/R).
➔ Turn the steam / hot water valve
control knob (fig. 1/P and 5) to
the right. Fill the cup up to the
desired level and turn the valve
control knob back to ‘0’.
Caution: Risk of scalding!
Watch out for splashes. The jet
be comes very hot during use.
Leave to cool for a few minutes
before touching, or only touch
the plastic parts.
3.7 Drawing steam / frothing milk
➔ Press the steam warm-up button
(fig. 1/O).
➔ The steam warm-up button (fig.
1/O) flashes for a brief warm-up
period.
➔ As soon as the steam warm-up
button stops flashing (after a
few seconds) and the symbol
flashes, steam can be drawn.
➔ Dip the jet (fig. 1/R) into the
cup / container with the milk to be
frothed. Make sure the control
knob is in the central position.
➔ Now turn the steam / hot water
valve control knob (fig. 1/P and 5)
to the right.
Caution: A little water
comes out before the steam.
➔ The steam warm-up button (fig.
1/O) flashes while you draw steam.
➔ Turn the valve control knob (fig.
1/P and 5) back to the left, to the
‘0’ position, to stop drawing
steam.
➔ Press the steam warm-up button
again (fig. 1/O and 5) to switch the
machine back to normal coffee
brewing mode.
Note: Steam can be drawn for about
2 minutes. Then the machine will
... 3. Making coffee