40
Note: As a protective measure, the
pipes are not filled with water when
the machine is first operat ed. The
machine indicates this as follows:
➔ When the machine has been
turned on with the On / Off button
(fig. 1/E), Symbol .
➔ Place a cup under the steam /
hot water jet (fig. 1/R).
➔ Turn the steam / hot water valve
control knob (fig. 1/P and 5) to
the right to open the valve. The
system then fills up and some
water may come out of the jet (fig.
1/R).
➔ As soon as the symbol
lights up without flashing and the
filling operation has stopped auto-
matically, you can turn the valve
control knob (fig. 1/P and 5) back
again to close it.
➔ Then follow the steps in ‘2.2
Getting started’.
➔ The machine is now operational.
2.3 Grinder settings
Caution: Grinder settings can only
be adjusted when the grinder is in
operation. You can adjust the grin-
der settings to suit the roast of
your coffee beans. We recommend
that you leave the grinder on a
medium setting.
➔ Slide the regulator on the rear
side (fig. 1/Q) into the desired
position while the grinder is runn -
ing. The smaller the dot, the finer
the coffee is ground. Remember:
· a light roast requires a finer
grind
· a dark roast requires a coarser
grind
Try out the different settings to
find the one that best meets your
personal preferences.
... 2. Set up
