609460

Nilfisk-ALTO SCRUBTEC R 466 Manual

90
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH USER MANUAL
28 SCRUBTEC R 466 - R 471 - R 471C - BOOST
®
R4 9098960000(1)2011-04 A
CHEMICAL MIXING SYSTEM DRAINING
(For machines with Chemical Mixing System)
To remove the detergent remained in the hoses and in the pump, perform the following procedure.1.
Turn on the machine by turning the ignition key (58) to “I”.2.
Press the switch (53). Check that the switch LED (54) turns on.3.
Press the switches (53 and 59) at the same time, until the switch LED (54) starts fl ashing (after about 5 seconds).4.
Release the switches and wait for the LED (54) to stop fl ashing and for the vacuum system to turn on.5.
Collect the detergent remained on the fl oor.6.
Turn the ignition key (58) to “0”.7.
Lift the tank (19), then check that the detergent tank hose (42) is empty, otherwise perform steps 3 to 7 again.8.
NOTE
The draining cycle lasts about 30 seconds, then the vacuum function automatically turns on, which allows to remove the
detergent remained.
The draining cycle can also be performed with the detergent tank (42) full of water, thus cleaning the system thoroughly.
It is advisable to perform this type of draining to clean the Chemical Mixing System from dirt and deposits if the machine
has not been used/cleaned for a long time.
The draining cycle can be performed also to quickly fi ll the detergent supply hose when the tank (42) is full but the
system is still empty.
If necessary, the draining cycle can be repeatedly performed.
FUSE CHECK/REPLACEMENT
NOTE
All machine electrical circuits are protected by auto-resettable electronic devices. The safety fuses activates only in case
of serious damage.
It is recommended to have the fuses replaced by qualifi ed personnel only.
Refer to the Service Manual available at any Nilfi sk Alto Retailer.
SAFETY FUNCTIONS
The machine is equipped with the following safety functions.
EMERGENCY PUSH-BUTTON
It is located in an easily accessible position (8). Press it fi rmly in case of immediate necessity to stop all machine functions.
To reset the machine operation, lift the tank assembly (44) and reconnect the battery connector (9).
ANTI-SKID SAFETY SYSTEM
This system reduces the speed when turning and when the machine tilts laterally to avoid sudden skids, this increasing the machine
stability in any condition.
DRIVER’S SEAT MICROSWITCH
It is inside the driver’s seat and it prevents the machine movement when the operator is not on the seat.
ELECTROMAGNETIC BRAKE
It is built-in the front wheel and keeps the machine braked when the machine is off or stopped.
9098960000(1)2011-04 A.indb 289098960000(1)2011-04 A.indb 28 07/04/2011 15:59:2307/04/2011 15:59:23
… 90 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SCRUBTEC R 466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC R 466 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info