609460

Nilfisk-ALTO SCRUBTEC R 466 Manual

88
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH USER MANUAL
26 SCRUBTEC R 466 - R 471 - R 471C - BOOST
®
R4 9098960000(1)2011-04 A
VACUUM SYSTEM MOTOR FILTER CLEANING
Drive the machine on a level fl oor.1.
Turn the ignition key (58) to “0”.2.
Open the cover (20) and check that the recovery tank (19) is empty, otherwise empty it with the drain hose (24).3.
Close the cover (20).4.
Carefully lift the tank assembly (44).5.
Check that the fi lter (37) is clean. If necessary clean it with water and compressed air, then install it.6.
SOLUTION FILTER CLEANING
Drive the machine on a level fl oor.1.
Turn the ignition key (58) to “0”.2.
Close the solution tap (A, Fig. 10) under the machine, behind the right rear wheel. The tap (A) is closed when it is in the 3.
position (B) and it is open when it is in the position (C).
Remove the transparent cover (D) and the gasket (E), then remove the fi lter strainer (F). Clean them with water and install 4.
them on the support (G).
NOTE
The fi lter strainer (F) must be correctly positioned on the housing (H) of the transparent cover (D).
Open the tap (A).5.
D
E
F
H
G
B
C
A
Figure 10
P100444
9098960000(1)2011-04 A.indb 269098960000(1)2011-04 A.indb 26 07/04/2011 15:59:2307/04/2011 15:59:23
… 88 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SCRUBTEC R 466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC R 466 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info