710464
72
Zoom out
Zoom in
Previous page
1/79
Next page
is, the access point uses static IP address settings), reboot your computer and verify the DNS address.
Alternatively, you can configure your computer manually with DNS addresses, as explained in your
operating system documentation.
Your computer might not use the router to which the access point is connected as its TCP/IP bridge.
If your computer obtains its information by DHCP, reboot the computer and verify the address of the
router to which the access point is connected.
For information about TCP/IP problems, see Troubleshoot Your Network Using the Ping Utility on page
73.
You Cannot Log In to the Access Point
If you are unable to log in to the access point from a computer on your local network and use the access
point web management interface, check the following:
If you are using an Ethernet-connected computer, check the Ethernet connection between the computer
and the access point.
Make sure that the IP address of your computer is in the same subnet as the access point.
If you did not enable the access point’s DHCP client or configure a static IP address when you connected
the access point to your router or network (see Connect the Access Point to Your Router or Network
on page 12), the access point uses its default IP address of 192.168.0.100. In this situation, you must
change the IP address on your computer to 192.168.0.210 with subnet mask 255.255.255.0 so that the
IP addresses of your computer and the access point are in the same IP subnet.
If your access point’s IP address was changed and you do not know the current IP address, use an IP
scanner application to detect the IP address. If you still cannot find the IP address, clear the access
point’s configuration to factory defaults.This sets the access point’s IP address to 192.168.0.100. For
more information, see Return the Access Point to Its Factory Default Settings on page 44 and Factory
Settings on page 76.
Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,
click the Refresh button to be sure that the Java applet is loaded.
Try quitting the browser and launching it again.
Make sure that you are using the correct login information. The user name is admin, and the default
password is password. Make sure that Caps Lock is off when you enter this information.
Changes Are Not Saved
If you are logged in to the access point web management interface and the access point does not save the
changes that you make on a page, do the following:
When entering configuration settings, always click the Apply button before moving to another page or
tab or your changes are lost.
Click the Refresh or Reload button in the web browser. It is possible that the changes occurred but
that the old settings remain in the web browser’s cache.
Troubleshooting
72
802.11ac Wireless Access
72

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info