710464
70
Zoom out
Zoom in
Previous page
1/79
Next page
Troubleshoot With the LEDs
When you turn on the power, the LEDs light as described here:
1.
The Power LED lights solid green temporarily, then blinks green, and finally turns solid green and
remains that way, indicating that the startup procedure is complete and the access point is ready.
2. When the startup procedure is complete, verify the following:
The WiFi LED lights solid green or blinks green (unless the WiFi radios are turned off).
If a LAN device is connected to a LAN port, the associated LAN LED lights solid green or blinks
green.
You can use the LEDs for troubleshooting. For more information, see the following sections:
Power LED Is Off on page 70
Power LED Remains Blinking Green on page 70
WiFi LED Is Off on page 71
Power LED Is Off
If the Power LED and other LEDs are off when the access point is turned on, do the following:
Make sure that the Power On/Off button on the back is in the on position, that is, it is pushed in.
Make sure that the power cord is correctly connected to the access point and that the power supply
adapter is correctly connected to a functioning power outlet.
Make sure that you are using the 12V, 1.5A power adapter that NETGEAR supplied for this product.
If the error persists, a hardware problem might exist. For recovery instructions or help with a hardware
problem, contact technical support at netgear.com/support.
Power LED Remains Blinking Green
When you turn on the power to the access point, the Power LED lights solid green temporarily, then
blinks green, and finally turns solid green and remains that way, indicating that the startup procedure is
complete and the access point is ready. During operation, the only time that the Power LED might be blinking
green is when firmware is being upgraded.
If the Power LED remains blinking green and does not turn solid green, a failure occurred or the access
point is malfunctioning.
If the Power LED does not turn solid green, do the following:
1. Turn the power off and back on and wait several minutes to see if the access point recovers.
2. If the access point does not recover, press and hold the Reset button to return the access point to its
factory settings (see Use the Reset Button on page 45).
Troubleshooting
70
802.11ac Wireless Access
70

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info