467082
43
Zoom out
Zoom in
Previous page
1/48
Next page
43
10.2. Operating the transmitter with Channel-Check
Once installed in the transmitter, Channel-Check carries out its work automatically
every time you switch the transmitter on. You will hardly be aware of anything hap-
pening at this stage. However, you must ensure that Channel-Check is set to check
the correct channel. Remember to ask yourself this question before you switch on
every time:
Do the crystals in the Channel-Check module and the transmitter
bear the same channel number?
The check can only function correctly if the channel number of the transmitter crys-
tal and the Channel-Check crystal are identical. If you are not quite certain, it is
always better to check one more time than make a mistake.
This is the procedure for switching on:
1. Extend the telescopic aerial fully
2. Keep about 10 m away from any other RC transmitters which are switched on
3. Switch on the transmitter
7 x a trill, LED flashes fast (approx. 1 per sec.), Display shows STOP means:
Your channel is in use or suffering interference.
The transmitter does not radiate an RF signal.
only one trill, LED turns on for about 4 sec.,
then flashes slowly (approx. Every 3 sec.) means:
Your channel is vacant, and Channel-Check has not picked up any
interference. You can safely operate your model.
Note: if the channel is already in use or if interference is detected,
the transmitter will not transmit! To repeat the check you must first
switch the transmitter off and then on again.
10.3. What should I do if STOP appears and the LED flashes fast?
First enquire among the other transmitter users whether somebody else is using
„your“ frequency. It regularly happens that a modeller changes crystals one day,
and the next day forgets what he has done.
If you cannot find another transmitter on your channel, wait a few minutes and
repeat the check by switching on again.
Don’t risk a flight until you have completed a series of checks, all of them suc-
cessful (LED is on for 4 sec. after switching on and then flashes slowly). For your
own peace of mind, carry out a series of checks, walking to different locations be-
tween attempts, so that you can be confident that your channel is really free.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Cockpit MM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Cockpit MM in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex Cockpit MM

Multiplex Cockpit MM User Manual - German - 48 pages

Multiplex Cockpit MM User Manual - French - 48 pages

Multiplex Cockpit MM User Manual - Italian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info