467082
47
Zoom out
Zoom in
Previous page
1/48
Next page
47
12.3. Using the diagnosis lead
If you just want to check and adjust your model without flying it, you can connect
the transmitter directly to the receiving system by means of a diagnosis lead, with-
out the transmitter radiating an RF signal.
This is the procedure:
1. Connect the transmitter (multi-function socket) to the receiving system in the
model using the diagnosis lead
2. Switch on the transmitter first (the RF section stays switched off)
3. Switch on the receiving system
Two diagnosis leads are available, depending on the receiving system in your
model:
Diagnosis lead for MULTIPLEX switch harness with charge socket # 8 5105
Diagnosis lead for „EinStein“ # 8 5162
12.4. Care of the transmitter
Protect your transmitter from mechanical damage, temperatures above 60°C (direct
sunshine inside a car), damp, solvents, fuel, combustion residues and dust (e.g. in
the modelling workshop). Bear in mind also that if the temperature alters quickly
(e.g. when you move from a warm workshop to a cold car) condensation may ap-
pear on the transmitter, and the moisture could prevent it working properly. If you
think this might have happened, carry out the range check with particular care, and
allow the transmitter plenty of time for its temperature to adjust to the ambient
conditions. Check also that the transmitter is completely dry on the inside.
Cleaning the transmitter
The best way to remove dust is with a soft paintbrush. The case can be cleaned with
a slightly damp cloth and a mild household cleaning agent.
!!
Ensure that no fluid gets inside the transmitter.
Maintenance
Your transmitter contains no parts which require maintenance.
!!
However, we strongly recommend that you carry out a range check and test all
the functions at regular intervals.
12.5. What should I do if I have queries or problems?
The first step should always be to ask your local model shop for advice.
Our Service Centres are listed on the back cover of these instructions.
For technical questions or queries about the use of the transmitter the
MULTIPLEX hotline is available on 0049-7233-7343
You can also reach us by eMail on the following address:
„kundendienst@multiplex-rc.de“
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex Cockpit MM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex Cockpit MM in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex Cockpit MM

Multiplex Cockpit MM User Manual - German - 48 pages

Multiplex Cockpit MM User Manual - French - 48 pages

Multiplex Cockpit MM User Manual - Italian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info