672474
24
Zoom out
Zoom in
Previous page
1/25
Next page
24
Maintenance and repair
Long-term storage
If the unit is to be stored for a prolonged period, proceed
as follows:
1. Drain all the fuel out of the tank and pour into a container
with the same two-stroke mixture. Do not use fuel which
has been stored for longer than 30 days.
2. Start the engine and leave running until it stops.
This ensures that there is no fuel left in the carburettor.
3. Leave the engine to cool down. Take out the spark plug
and pour a high-quality engine oil or two-stroke oil into
the cylinder. Slowly pull the starter rope to distribute
the oil. Reinstall the spark plug.
Note: Before starting the lawn trimmer after storage, take out
the spark plug and pour all the oil out of the cylinder.
4. Thoroughly clean the unit and check for loose and
damaged parts. Repair or replace damaged parts and
tighten loose screws, nuts and bolts. The unit can now
be stored.
5. Store the unit locked away or high up to prevent
unauthorised use and damage. Keep the unit away
from children.
Transportation
Before transporting the unit, leave it to cool down.
Empty the fuel tank before transporting the unit.
Filler cap must be closed tightly.
Secure the unit to prevent it from shifting during
transportation.
Warranty
The warranty regulations issued by our company or the
importer are valid in all countries. We shall repair any faults
on your unit free of charge in accordance with the warranty,
provided the fault was due to defective materials or manu-
facturing. If claiming under the warranty, please contact your
seller or your nearest branch.
Troubleshooting
Engine does not start
Cause Procedure
Ignition switch set to OFF Set switch to ON.
Fuel tank empty Fill fuel tank.
Intake pump not depressed adequately
Slowly and fully depress the intake pump 10 times
Engine flooded On appliances with a choke lever:
Implement the starting process with the choke lever
in the operating position.
On appliances without a choke lever:
Press the throttle and pull the starter cable.
Old or incorrectly mixed fuel Empty the tank/fill with fresh fuel mixture.
Dirty spark plug Replace or clean spark plug.
Engine does not run constanly at no load
Cause Procedure
Air filter blocked Clean or replace air filter.
Old or incorrectly mixed fuel Empty the tank/fill with fresh fuel mixture.
Carburettor incorrectly adjusted Have carburettor adjusted by customer service personnel.
Engine does not accelerate
Cause Procedure
Old or incorrectly mixed fuel Empty the tank/fill with fresh fuel mixture.
Carburettor incorrectly adjusted Have carburettor adjusted by customer service personnel.
24


Need help? Post your question in this forum.

Forumrules
1

Forum

mtd-827-series

Reset search

  • Comment retirer sur la debroussailleuse MTD827 le boîtier fil et remplacer pour la lame. Submitted on 29-10-2022 at 14:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MTD 827 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MTD 827 series in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD 827 series

MTD 827 series User Manual - German - 27 pages

MTD 827 series User Manual - Dutch - 26 pages

MTD 827 series User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info