569841
39
Zoom out
Zoom in
Previous page
1/44
Next page
DETERMINING
GUIDE
NUMBERS
FOR FLASH
The
Flash Meter
lV can be
used to determine
the
guide
number
for
the
actual
film speed in
use.
1.
With
the
desired
film
speed
set and
the
measuring-
mode selector
set
for
"CORD"
or
"NON.C"
operation,
move the
display-mode
selector
to
"ExlN",
then
attach
the optional
flat diffuser.
2.
Position
the
meter
at
a specific
distance
(e.g',
3
meters
or
10
feet)
from
the
flash
unit
and
point
the
diffuser directly
at
the
flash.
3.
Press
the
measuring
button
all
the
way
in to
activate
the
meter's
circuit.
Then, trigger
the
flash
manually.
Read
the displayed
information
in the
formula
below
to
determine
the
guide
number:
r+
GN=
1.14xLx2
z
Where
L
=
Flash-to-meter distance
Example
With
a
display reading
of
"ExlN
10.0" at
ISO
100
and a
flash-to-meter distance of 1
meter,
work
the
following
equation
as
follows:
10
GN=1.14x1x2'
=1.14x1x2s
=
1.14
x
1
x32
=
approx.
36.5
',ffi
MEASURING
ILLUMINANCE
To
measure illuminance of a continuous
light source:
1.
Set
film speed to
ISO
100,
measuring
mode
to
"AMBl",
and
display
indication to
"ExlN".
Attach
the optional
flat diffuser.
2.
Position
the
diffuser
parallel
to and
as
close as
possible
to the surface
where
light
is to
be
meas-
ured.
Push
the
meter's measuring
button.
3.
Read the
"ExlN"
value
and
use it in the
following
formula:
lux
=
2.5 x2"'*
Lux
100,000
10,000
1,000
100
10
1
o246810121416
lExlN.l
Example
With
a
display reading
of
"ExlN
10.0"
work
the
equation as
follows:
lux
=
2.5
x2'*'*
=
2.5
x 21o'o
=
2.5
x
1O24
=
approx. 2600
NOTE
o
For
precise
measurement
of illuminance,
use
of
the
Minolta llluminance Meter
is
recommended.
www.orphancameras.com
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta Flash Meter IV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta Flash Meter IV in the language / languages: English as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info