773588
5
Zoom out
Zoom in
Previous page
1/7
Next page
3
Microlife VSA
EN
The higher value determines the evaluation.
Example:Ifnoshock,abloodpressureof150/85or120/98will
show as «blood pressure high».
4. Data Memory
This instrument automatically stores the last measured blood
pressure values.
Viewing the stored value
Hold down the ON/OFF button (the instrument must have been
switched off beforehand) until memory appears and then release
the button.
5. Battery Indicator and Battery charging
Low battery - When the battery is almost empty the battery
symbol AN will flash as soon as the instrument is switched on
(partly filled battery displayed). The instrument will continue to
measure reliably, you should charge the battery after flat battery
symbol appear.
Flat battery – charge the battery
When the battery is flat, the battery symbol AN will flash as
soon as the instrument is switched on (flat battery displayed).
You cannot take any further measurements and must charge the
battery.
1. Connecttheinstrumenttothe5VUSBpoweradapteror
computer using the USB cable.
The connected power adapter and computer need to
meetIEC60950-1orIEC60601-1standard.
TheUSBconnectioncan'tbeusedtotransferanydata
between PC and device. It is used for charging the
battery only.
2.Duringthechargingprocess,thechargingindicatorAT will light
up in orange.
3. When the battery is completely charged, the charging indicator
will light up in green.
5. Duringthemeasurement,thepulseindicatorAQ flashes on
the display and a beep sounds every time a heartbeat is
detected.
6. The result, comprising the systolic AK , the diastolic AL blood
pressure value and the pulse rate AM is displayed and a
longerbeepsoundisheard.Alsolookattheexplanationsin
this booklet.
7. When the measurement is completed, remove the cuff from
thepatient'sarm.
8. Switchofftheinstrument.(Themonitordoesswitchoff
automaticallyafterapprox.30sec.).
3. Hypertension and Shock Indicator
Shock, due to bleeding or sepsis, can cause a change in blood
pressureandheartrate.Shockindexisdefinedasheartrate
divided by systolic blood pressure.
When measurement is completed, the symbol AO and traffic light
9mayindicatethatyourbloodpressureorshockindexishigher
than the recommended range.
Range Systolic Diastolic Traffic light
severe shock Red LED will flash
and show the arrow
downflashing
blood pressure
dangerously high
160 110 Red LED will flash
and show the arrow
up constantly
shock < 160 Yellow LED will flash
and show arrow
down flashing
blood pressure
high
140
and<160
90
and<110
Yellow LED will flash
and show arrow up
constantly
blood pressure
normal and no
shock
<140 <90 Green LED will light
constantlyanddon't
show any arrow
Note: the arrow downwards indicates the patient is in shock!
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Microlife VSA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Microlife VSA in the language / languages: English as an attachment in your email.

The manual is 0.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info