671952
6
Zoom out
Zoom in
Previous page
1/26
Next page
7 8
- Zur Önung des Pulverschachtes
halten Sie
die Taste zur Kaeepulververwendung für
5Sekunden gedrückt .
- Die Pulverschachtklappe önet sich und der
Pulver schacht kann mit dem Pinsel gereinigt
werden.
- Zum Schließen der Pulverschachtklappe halten
Sie die Taste zur Kaeepulververwendung für
5Sekunden gedrückt.
- Klappen Sie den Schwenkfilter wieder ein und
stellen Sie das Gerät auf.
Setzen Sie jetzt den Mahlwerksring wieder ein
und klappen Sie den Bügel nach unten.
Drehen Sie den Mahlgradregler wieder in eine
Mahlposition zurück .
Setzen Sie den Bohnenbehälter wie oben
beschrieben wieder auf.
Entkalkung:
Basierend auf der von Ihnen voreingestellten
Wasserhärte (siehe Punkt 3) sollte die Entkalkung
kurzfristig durchgeführt werden, nachdem die
Verkalkungsanzeige CALC aufleuchtet.
Dosieren Sie die Entkalkerflüssigkeit nach
Hersteller angaben und füllen Sie sie in den Wasser-
tank. Wir empfehlen die Verwendung von Melitta
®
Anti Calc Filter Café Machines.
Betätigen Sie kurz die CALC-Taste . Die rote
LED beginnt zu blinken .
Im Display erscheint die Uhrzeit und „CALC“ im
Wechsel.
Der Entkalkungsprozess läuft nun automatisch ab.
Um auch starke Verkalkungen zu entfernen, beträgt
die Dauer des Entkalkungsprozesses ca. 25 Minuten.
Achtung: Lediglich durch einen vollständig durch-
geführten Entkalkungsprozess werden sämtliche
Kalk rückstände entfernt. Nur dann erlischt die
CALC LED . Daher darf der Entkalkungsprozess
nicht abgebrochen werden.
Nach dem vollständigen Ablauf des Entkalkungspro-
zesses erlischt die Beleuchtung der CALC-Taste .
Das Gerät schaltet sich automatisch ab.
Um Entkalkerreste vollständig zu entfernen, müssen
Sie nach Beendigung des Entkalkungsprozesses das
Gerät zweimal mit der maximalen Wassermenge
ohne Kaee betreiben. Gehen Sie dazu wie unter
Punkt 2 beschrieben vor.
8. Entsorgungshinweise
Die mit diesem Symbol gekennzeichneten
Ge räte unterliegen der Europäischen Richtlinie für
WEEE (Waste Electrical and Electronic Equipment).
Elektrogeräte gehören nicht in den Hausmüll.
Entsorgen Sie das Gerät umweltgerecht über
geeignete Sammelsysteme.
Verpackungsmaterialien sind Rohstoe und
recyclebar. Bitte führen Sie sie in den
Rohstokreislauf zurück.
Dear customer,
Thank you for choosing a Melitta
®
AromaFresh filter
coffee machine with integrated grinder. These oper-
ating instructions will help you to familiarize yourself
with the various features of your appliance and to
experience the best coffee enjoyment.
If you require further information or have any ques-
tions then please contact Melitta
®
or go to our inter-
net homepage at www.melitta.de
We hope you enjoy your new filter coffee machine
with integrated grinder.
For your safety
The appliance complies with current European
regulations.
The appliance has been tested and certified by an
independent test institute:
Please read all safety notes and the operating instruc-
tions. To avoid hazards you must observe the safety
notes and operating instructions. Melitta
®
will accept
no liability for damage caused by non-observance of
them.
1. Safety notice
• The appliance is suitable for
use in private households or
for preparing coee in amounts
usual in private households. All
other use is contrary to that
intended and can lead to injury
or damage. Melitta
®
is not liable
for damage caused by using the
appliance in ways other than
that intended.
• The appliance must not be kept
in a cupboard when in use.
• Connect the appliance only to
a correctly installed socket.
• Always disconnect the appliance
from the supply if it is left unat-
tended and before assembling,
disassembling or cleaning.
• The hotplate becomes very hot
during use and remains hot for
a considerable time even after
brewing is finished. Contact with
the hotplate can lead to burns,
do not touch the hotplate.
• During use parts of the appli-
ance e.g. the hotplate and the
steam outlet at the filter can
become very hot. Avoid contact
with these parts and with hot
steam.
• Do not open the filter while
brewing.
• Ensure that the power cable
does not come into contact
with the hotplate.
• Do not use the appliance if the
power cable is damaged.
• Never immerse the appliance in
water.
• Do not use the glass pot in the
microwave.
• This appliance can be used by
children who are 8 years old
or over, if they are supervised
or have been instructed in the
safe use of the appliance and
have understood the dangers
associated with it. Cleaning and
maintenance of the appliance
should not be undertaken by
children unless they are 8 years
old or over and are supervised.
The appliance and power cable
should be kept away from chil-
dren under 8 years old.
The appliance can be used by
people with limited physical,
sensory or mental aptitude, or
who have limited experience
or knowledge, if they are su-
pervised or instructed in how
to use the appliance safely and
have understood the dangers
involved in using it.
Children must not play with the
appliance.
Replacing the power cable and
any other repairs should only
be carried out by the Melitta
®
customer service or by an au-
thorised repair workshop.
2. Before rst use
Ensure that the mains voltage in your home corre-
sponds to that indicated on the identification label
on the base of the appliance.
Connect the appliance to the mains power. Cable
which is not required, can be stored in the cable
spool .
Set the current time using the buttons ‘H’ and ‘M’
. It is possible to speed this up by holding in the
respective button. The display light can be turned
on or o by holding down the H and M buttons
for longer than 2 seconds.
All appliances are tested for fault free operation
when they are produced. Some residual water may
be left behind after this test. Rinse the appliance
twice with the maximum amount of water without
a coee filter or ground coee in order to clean it.
To do this, fill the water tank up to the 10 cup
level marker, then press the setting for using ground
coee and turn the appliance on .
The appliance has a variety of features for the best
coffee enjoyment and ease of use. These features are
explained below.
3. Set water hardness
Depending on water hardness lime scale may build up
in the appliance. This increases the appliances energy
consumption as lime scale on the heating element
can prevent the water heating eectively. To avoid
damage the appliance must be descaled regularly. The
descaling display helps you in this. If the CALC-button
is permanently lit this shows that the appliance
needs to be descaled.
The appliance is pre-set for a high level of water
hardness (level 4). You can find out the level of water
hardness in your area by asking your local water
 G B
 D E
6


Need help? Post your question in this forum.

Forumrules
1

Forum

melitta-aroma-fresh

Reset search

  • Our machine no longer pumps the water to brew the coffee. Does anyone know how to fix this? Submitted on 29-11-2020 at 21:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta AROMA FRESH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta AROMA FRESH in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info