494808

Meliconi Control TV Manual

7
Zoom out
Zoom in
Previous page
1/7
Next page
INFO-LINE
WARRANTY: 2 years
Tampering or improper product use will void this
guarantee.
Remote control model CONTROL TV
Purchase date
Agent’s stamp
TROUBLESHOOTING
PROBLEM
The TV does not respond and the light
indicator does not light up when you
press a key.
The TV does not respond but the
light indicator lights up.
The light indicator flashes.
The remote control commands are not all
working correctly.
The brand for your TV is not listed in the Code
Book.
SOLUTION
Try some of the other frequently used keys.
If the problem persists, check that the
batteries are fitted correctly.
If necessary replace them
with 2 new 1.5 V AAA/LR03
alkaline batteries.
Check that the batteries are new
and that the remote control is
pointing at the appliance without any
obstacles in the way. If required,
reset the remote control code,
following the programming
procedure A or B or C .
The batteries are low. Change them.
You may have used the wrong
code. Reset the remote control code,
following the programming
procedure A or B or C .
Set the remote control code,
following the global search
programming procedure C .
If you have any queries about CONTROL TV:
•read this booklet carefully; this will help you to solve almost all problems
• consult our Internet site www.meliconi.com to answer all your queries more easily and quickly.
You can
customise
your remote
control to use
any 4
additional
TV functions,
using the
function keys
F1- F2 - F3 - F4.
In the symbol table corresponding to your
remote control code, locate the additional
function you require and note down the
number which appears below it.
Note that only number functions can be saved
using F1- F2 - F3 - F4.
PROGRAMMABLE KEYS
The function programming procedure is as
follows:
TV function example: EXP BOT
Press and hold down SHIFT and type in the
number written beneath function (028).
Press one of the function keys (e.g. F1)
and hold it down together with SHIFT.
After a few seconds, the light indicator will
emit a series of 3 flashes to indicate that the
function has been saved correctly.
Release SHIFT and F1.
From now on, whenever you press F1,
the additional command just saved is
transmitted to the appliance and stops when
F1 is released.
NOTE: If the light indicator does not flash, repeat the saving procedure described above.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Control TV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Control TV in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info