494808
3
Zoom out
Zoom in
Previous page
1/7
Next page
1. Make sure that the TV is ON.
2. In the code book enclosed,
look for the brand of your TV
and make a note of the first
code indicated BENEATH
the brand previously identified
(e.g. Philips TV 075).
3. Hold down the SHIFT
and ON/OFF keys together
until the light indicator at the top
starts to flash indicating that the
remote control is in programming
mode.
4. Release the keys and press the
numeric key 8 once. Within
the next 15 seconds, key in the three
figure code you noted previously
(e.g. 075).
Three flashes indicate that the code
has been saved correctly. If not, try
the code entry procedure again from
point 3.
Additional check
Point the remote control at the TV.
Check that the appliance responds
correctly to the commands sent.
If there is no response or the appliance
only responds partially or incorrectly,
it is probable that you have used
the wrong code. In this case, try the
procedure again from point 3.
This time, however, use the
NEXT CODE in the list (e.g. 099).
Note down the TV code used to program
the remote control on the adhesive label
inside the battery cover for rapid
consultation.
NOTE: THE LIGHT INDICATOR
STOPS FLASHING
The remote control leaves the
programming mode and the light indicator
stops flashing:
if no keys are pressed for 15 seconds
if an invalid brand code is entered.
8
0
7
5
DIRECT CODE ENTRY
FOR REMOTE CONTROLS VERSIONS
V5 - V6
B
DIRECT CODE ENTRY
FOR REMOTE CONTROLS VERSIONS FROM
V1 TO V4
B
PAY ATTENTION TO THE REMOTE CONTROL VERSION
1. Make sure that the TV is ON.
2. In the code book enclosed,
look for the brand of your TV
and make a note of the first
code indicated BENEATH
the brand previously identified
(e.g. Philips 103).
3. Hold down the SHIFT
and ON/OFF keys together
until the light indicator at the top
starts to flash indicating that the
remote control is in programming
mode.
4. Release the keys.
Within 15 seconds, enter the
code previously identified
(e.g. 103). Three flashes indicate
that the code has been saved
correctly. If not, try the code entry
procedure again from point 3.
Additional check
Point the remote control at the TV.
Check that the appliance responds
correctly to the commands sent.
If there is no response or the appliance
only responds partially or incorrectly,
it is probable that you have used
the wrong code. In this case, try the
procedure again from point 3.
This time, however, use the
NEXT CODE in the list (e.g. 111).
Note down the TV code used to program
the remote control on the adhesive label
inside the battery cover for rapid
consultation.
NOTE: THE LIGHT INDICATOR
STOPS FLASHING
The remote control leaves the
programming mode and the light indicator
stops flashing:
if no keys are pressed for 15 seconds
if an invalid brand code is entered.
1
0
3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Control TV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Control TV in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info