168723
10
Zoom out
Zoom in
Previous page
1/16
Next page
FEATURES:
• PROTECTION and POWER LED indicators
• Bass EQ: 45Hz bass boost from 0dB to 9dB
• X-OVER:
- LP/BP: Selects built in LOW PASS filter, variable from 30Hz to 150Hz
- HP: Selects built in HIGH PASS filter, variable from 10Hz to 1.2KHz
- FULL: Bypasses all crossovers for full frequency range operation
Note that the LOW PASS signal is MONO
- In the LP position, the HIGH PASS filter acts as a subsonic filter. When the
HP switch is higher adjusted than 150Hz, you can hear no sound
- When the LP mode is selected, a 0 to +9dB at 45Hz BASS EQ is active
• The REMOTE jack enables a dash mount control for the BASS EQ in LP mode only
• INPUT LEVEL sensitivities are variable from 0.2volts to 6volts
3. Crossover frequency control checklist:
N/A for full range operation.
FULL RANGE
STEREO LINE INPUT
FULL RANGE
SPEAKERS
This is the most basic application for the Discus Series 2 channel amplifiers.
1. Interconnect cable checklist:
Connect the LINE INPUTS to the Radio/CD with good quality RCA cables.
2. Crossover switch:
The X-OVER switch must be in the FULL position.
FULL RANGE STEREO
3. Bass Remote Module:
Plug in the optional Remote Bass Module to the REMOTE jack and
control the Bass EQ setting.
IMPORTANT: Minimum final loudspeaker impedance must be not lower than
4ohms in mono operation.
This application illustrates the basic mono bridging method for all
Discus amplifiers.
1. Interconnect cable checklist:
Connect mono line input via Y-adapter from mono source or single
Left or Right RCA from stereo source.
IMPORTANT: Do not connect the Left and Right stereo signals
together to achieve a mono signal as this will damage the output
stage of source and possibly the input stage of the amplifier.
2. Crossover switch:
The X-OVER switch must be in the LP/BP MONO position.
MONO/BRIDGED
MONO LINE INPUT
VIA Y-ADAPTER
TO BATTERY +12v
VIA FUSE
REMOTE TURN-ON
CHASSIS GROUND
TO BATTERY +12v
VIA FUSE
REMOTE TURN-ON
CHASSIS GROUND
MONO SUBWOOFER
ENG
2-C HANN EL- AMP LIFI ERS
DSC2150
• Each model is capable of 4ohms or 2ohms operation per channel, or 4ohms mono
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MB Quart dsc4125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MB Quart dsc4125 in the language / languages: English, German as an attachment in your email.

The manual is 6,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info