168723
1
Zoom out
Zoom in
Previous page
1/16
Next page
SYSTEMANORDNUNG
Die gelungene Einrichtung einer jeden Autostereoanlage hängt von mehreren Faktoren ab wie Systemauslegung, Installationsausführung und
Systemeinstellung. Bitte berücksichtigen Sie, dass jedes System nur so gut sein kann wie sein schwächstes Glied.
Bitte berücksichtigen Sie, dass Systeme mit höherer Leistung nicht unbedingt nur zur Erzeugung hoher Schalldruckpegel dienen, sondern auch,
um eine größere Leistung im Frequenzspitzenbereich zu erzielen, damit musikalische Spitzen ohne Verzerrung sauber wiedergegeben werden können.
Verstärker mit niedrigerer Leistung erreichen eher ihre Begrenzung, als ihre leistungsstärkeren Verwandten und können bei Übersteuerung aufgrund
der von einem begrenzten Signal erzeugten Oberschwingungen, die zur Überhitzung der Schwingspulen führen, Lautsprecherfehlfunktionen
hervorrufen.
Der Verstärker sollte immer mit vertikal verlaufenden Kühlrippen montiert werden, um die beste Kühlkonvektion zu erzielen und ein Überhitzen
zu vermeiden. Zwecks Zuverlässigkeit und geringerer Interferenzen der Audioanlage durch spannungserzeugende Komponenten des Fahrzeuges,
besorgen Sie sich bitte Cinch-Kabel bestmöglicher Qualität.
Es wird ausdrücklich empfohlen, den Verstärker mit den vier mitgelieferten Halterungsschrauben auf einer Faserplatte oder einer anderen stabilen
Trägerplatte zu montieren. Befestigen Sie den Verstärker nicht auf Metall, da dies Geräusche verursachen oder andere unerwünschte Effekte
verursachen kann. Bauen Sie den Verstärker waagrecht ein, um eine optimale Hitzeableitung zu gehrleisten. Den Versrker an Lautsprechergehäusen
zu befestigen ist nicht zu empfehlen, da hierdurch Bauteile des Verstärkers beschädigt werden können. Wenn Sie einen Einbauplatz für den Verstärker
wählen, stellen Sie sicher, daß genügend Abstand zu Kabeln, Benzintank, elektrischen Bauteilen und den Bremsleitungen usw. eingehalten wird.
MAXXSONICS USA, INC.
1290 Ensell Road
Lake Zurich, Illinois 60047 USA
www.maxxsonics.com
E I N B A U A N L E I T U N G
A M P L I F I E R S
SYSTEM DESIGN
The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please
remember that any system is only as good as its weakest link.
Please remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish a headroom
capability, to reproduce musical peaks cleanly without distortion.
Lower power amplifiers will clip earlier than their more powerful cousins, and cause loudspeaker failure when overdriven, due to the harmonics
generated by a clipped signal, thus overheating voice coils.
Amplifiers should be mounted with the fins running horizontally for best convection cooling, to minimize overheating. Purchase the
best quality RCA cables you can afford, for reliability and less engine noise interference in the audio system.
It is highly recommended that the amplifier be mounted to a board of MDF or other solid structure using the 4 mounting screws provided. Avoid
mounting the amplifier to metal as this can introduce noise and other unwanted issues. When mounting the amplifier, ensure that it is mounted
HORIZONTALLY for optimal heat dissipation. Mounting amplifiers to speaker enclosures is not recommended as this can cause damage to the
amplifier components. When choosing a location for mounting the amplifier, ensure that you check for clearance from wires, gas tank, electrical
devices and brake lines etc.
ENG
DISTRIBUTION:
Audio Design GmbH
Am Breilingsweg 3
D-76709 Kronau (Germany)
Tel. +49 (0)7253 - 9465-0
Fax +49 (0)7253 - 946510
DEU
V E R S T Ä R K E R
INSTALLATION GUIDE
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MB Quart dsc4125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MB Quart dsc4125 in the language / languages: English, German as an attachment in your email.

The manual is 6,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info