650498
4
Zoom out
Zoom in
Previous page
1/8
Next page
SuperLoader 3 Quick Start Guide
Unpacking the Autoloader 0
Before you begin, clear a desk or table so that you can
unpack the autoloader. You also need to select an open 2U
computer rack location near the server that will host the
autoloader.
Unpack and inspect the autoloader for shipping damage by
doing the following:
1 Clear a table or desk so that you have room to unpack
the autoloader.
2 Inspect the shipping box for damage. If you notice any
damage, report it to the shipping company
immediately.
3 Open the shipping box and remove the accessories
package. Set the accessories package aside for now.
4 Lift the autoloader and padding out of the box and
place it on the work surface, top facing up. Do not set
the autoloader on either end or sides
.
5 Carefully remove the shipping padding from the left
and right sides of the autoloader. Then remove the bag
from the autoloader.
6 Remove the foam insert from the magazine bay of the
autoloader. Save the packing materials in case you
need to move or ship the autoloader in the future
.
NOTE: If the cover must be taken off, there are 26 screws
that need to be removed.
CAUTION: If the room in which you are working differs
from the temperature in which the autoloader was
shipped or stored by 15° C (30° F) or more, let the
autoloader acclimate to the surrounding
environment for at least 12 hours before opening
the shipping carton.
C
AUTION: If your unit was ordered as a one-magazine
autoloader, be sure to remove the plastic shipping
insert from the magazine bay before connecting or
operating your autoloader. Insert either a magazine
or a magazine blank into the bay. The autoloader
will not function without both magazine bays
equipped with either a magazine or a magazine
blank.
Accessories 0
Mounting the Rail Kit 0
For instruction on mounting the autoloader in a standard
19-inch rack, refer to the
Quantum SuperLoader 3 Rack
Installation Quick Start Guide
.
Connecting the SCSI and Power Cables0
To connect the SCSI and power cables to the autoloader,
follow these steps:
1 Shut down and turn off the selected server. Turn off all
attached accessory devices, such as printers and other
SCSI devices.
2 Attach one end of the SCSI cable (included in the
accessory kit) to one of the connectors on the back
panel of the autoloader.
3 Attach the other end of the SCSI cable to the connector
on the SCSI host adapter or to the connector on the
previous device on the SCSI bus.
1SCSI cable
2 SCSI terminator
3 Power cable
4 Quick Start Guide
5 CD (documentation)
6 Magazine blank
7 Bar code labels
8 TORX L-key drivers (T8 and T10)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Quantum SuperLoader 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Quantum SuperLoader 3 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maxdata Quantum SuperLoader 3

Maxdata Quantum SuperLoader 3 Quick start guide - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info