650498
1
Zoom out
Zoom in
Previous page
1/8
Next page
SuperLoader 3
Quick Start Guide
TABLE OF CONTENTS
Installing the Autoloader ..................1
Accessories .........................................2
Choosing a Location ..........................2
UL Requirements................................2
Understanding Autoloader
Features..............................................3
Bar Code Reader ................................3
Product Overview ..............................4
Unpacking the Autoloader ................4
Accessories .........................................4
Connecting the SCSI and Power
Cables .................................................4
Preparing the Host and Verifying
the Connection ..................................5
Installing the Device Drivers .............6
After Installation................................7
This quick start guide provides basic installation and configuration instructions. For
more information, see the
Quantum SuperLoader3 Autoloader User’s Guide
on the
documentation CD provided with your SuperLoader3 autoloader.
Installing the Autoloader 0
Installing the autoloader consists of the following steps, which are explained in
more detail later in this section:
1 Prepare to install your new Quantum SuperLoader 3 autoloader (see
Installation Preparation
).
2 Identifying the proper SCSI bus types (see SCSI Bus Requirements
).
3 Identify the accessories that come with the autoloader (see Accessories).
4 Install the autoloader in a computer rack. For rack installion, see the rack
installation guide.
5 Shut down or turn off the server and all devices attached to the server (see
Connecting the SCSI and Power Cables).
6 Attach the SCSI cable to the autoloader and server's SCSI host adapter (see
Connecting the SCSI and Power Cables).
7 Attach the power cable to the autoloader and plug in the power cable to the
nearest power outlet (see Connecting the SCSI and Power Cables). Power the
autoloader on to ensure it passes the Power-on Self Test (POST).
8 Set the SCSI ID for the autoloader.
9 Set up the host and verify the connection (see Preparing the Host and
Verifying the Connection).
Installation Preparation 0
Before you install your new Quantum SuperLoader 3 autoloader, unpack it
carefully and inspect it for any damage that might have occurred during shipping.
The
Quantum SuperLoader 3 Quick Start Guide
describes all the necessary
information to unpack and inspect your autoloader correctly.
Ensure that the work area is free from conditions that could cause electrostatic
discharge (ESD). Discharge static electricity from your body by touching a known
grounded surface, such as your computer's metal chassis.
WARNING: Whenever you power cycle the autoloader, allow 10 seconds before
turning the power back on. The power supply requires at least two to three
seconds for the capacitors to discharge. This ensures a complete system
reset on power down and may avoid system errors.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxdata Quantum SuperLoader 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxdata Quantum SuperLoader 3 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Maxdata Quantum SuperLoader 3

Maxdata Quantum SuperLoader 3 Quick start guide - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info