I have recently bought Marantec Command 222 (868 Mzh) for my garage door driven by Marantec comfort 280. I have tried to program Command 220 in accordance with instructions. However , after programing was performed the command 220 did not open the door-did not operate. Namely, after presing 4 digit PIN on it , the LED went green but door did not move.

Apparently there is discrepancy in the programing manual. Namely chapter 6.3 is in discrepancy with chapter 8.1.2. (point 3.) in the part when PIN is requested because in chapter 6.3 it is required to enter PIN ONLY what is in discrepancy with chapter 8..1.2. point 3 where it is requested to enter PIN AND channel number .

Could you please clarify exactly how to program the model command 222.

Thanks

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

• First, read the manual;
• Check if your question has been asked previously;
• Try to ask your question as clearly as possible;
• Did you already try to solve the problem? Please mention this;
• Is your problem solved by a visitor then let him/her know in this forum;
• To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
• Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Post your question in this forum.

Info