601657

Lenco SR-03 BT Manual

3
Zoom out
Zoom in
Previous page
1/37
Next page
UK-2
SWITCHING YOUR RADIO ON FOR THE FIRST TIME
When the radio is connected to the AC power for the first time, it will be in standby mode, the display will
show the clock and flash.
1. Insert one end of the AC power cord to the AC input socket located at the back of the unit.
2. Connect the AC power cord to the AC mains outlet.
3. Press the button once to turn the radio on.
4. To switch the radio to standby during on, press and hold the button for longer than two seconds.
SETTING THE CLOCK
The clock can only be set in standby mode. When the unit is powered up for the first time, it will be in
standby mode, the display will show “0:00” and flash, you can now proceed for the clock setting
1. Press and hold the CLOCK button for longer than two seconds until the display shows “24 H”, then
press the or button to select the “12H” (12-Hour) or “24H” (24-Hour) clock display format,
when the desired format appears in the display, press the CLOCK button to confirm. (F. 1) (F. 2)
2. The display will show the clock with the hour digits flash, repeatedly press the or button to
set to the correct hour followed by pressing on the CLOCK button to confirm, first set the hour and
then the minute. (F. 3)
3. When the display shows the correct time, press the CLOCK button again to confirm, the clock setting
is now completed.
4. The clock is displayed during unit standby or under AUX, USB and Bluetooth operation.
ALARM FUNCTION
This unit incorporates an alarm function. You can use this function to wake you to an electronic buzzer
tone, your favourite FM radio station or the USB MP3 songs.
The alarm function can be activated only when the unit is in standby. There is no alarm & snooze function
when the unit is in operation.
Setting up the alarm and the wake-up time
1. To set the alarm, first switch the unit to standby, then press and hold the ALARM button for longer
than two seconds to enter into the alarm set up mode - the alarm icon will be displayed and the hour
digits of the alarm wake-up time in the display will flash. (F. 4)
2. To set the alarm wake-up time, repeatedly press the or button followed by pressing the
ALARM button to confirm – first set the hour and then the minute. (F. 5)
F.2F.1 F.3
FEATURES AND CONTROLS
1. MEMORY / BUTTON
2. MEMORY / BUTTON
3. LCD DISPLAY
4. VOLUME/SCROLL CONTROL
5. MEMORY / BUTTON
I◀◀
▶▶I
►/II
11. ROD ANTENNA
12. HEADPHONE JACK
13. AUX IN SOCKET
14. USB PORT
15. AC CORD SOCKET
6. SPEAKER
7. ALARM/SNOOZE BUTTON
8. / MODE BUTTON
9. BACKLIGHT / CLOCK BUTTON
10. SLEEP BUTTON
6
1 2 3 4 5
6
7
8
9
10
11
12
13
14
15
◀◀
II
▶▶
II
◀◀
II
▶▶
II
◀◀
II
▶▶
II
►
►
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco SR-03 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco SR-03 BT in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info