778223

Laurastar Izzi Manual

5
Zoom out
Zoom in
Previous page
1/40
Next page
- 9 - - 10 -
• Press on the STEAM button (8) to activate the steam (K).
• Place the DMS Steamer on the area to be disinfected.
• Press the STEAM button (8) continuously. Make slow,
regular movements, touching the material, horizontally and
vertically and in all directions (L).
• To stop the steam, release the STEAM button.
• Remove the Textile-Guard or Surface-Guard after each use.
•Place the DMS Steamer back on the Steam Generator.
After disinfecting a surface, let it air-dry or wipe
down using a clean cloth, which has rst been
disinfected using your Laurastar IZZI (M).
ADVICE: For better mobility in the house, use an
extension cord if necessary. Please refer to the
technical instructions on page 13.
To better move your device around the house,
you can use a Laurastar IZZI CART (available
on our online store or from an ofcial Laurastar
retailer).
FILLING THE WATER TANK
Empty water indicator light (6) and sound signal
• A warning alarm sounds and a red indicator light comes on
to indicate that there is no water in the tank (N).
• You can ll up the water tank without having to turn it off rst.
To ll the water tank (4)
• Lift up the lid of the water tank and remove it by pulling on
the lid. Fill it up with tap water (O).
• Reinsert the water tank with the lid up, then close it (P).
O
• Turn off the device by pressing the main switch (5) and
remove the power plug (10) from the wall socket (A).
• Remove the Textile-Guard or Surface-Guard after each
use.
WARNING! Allow the device to cool down for
at least 2 hours before storing it away.
• Place the DMS Steamer (2) on the steam generator (B).
• Wrap the power cable (11) around the device (C).
If your model includes an automatic rewinder (only
available on IZZI Plus), pull the power cord to activate
the automatic rewind.
• Wrap the steam tube (3) around the device (C).
• You can leave water in the heater until the next use.
MAINTENANCE
WARNING: Before cleaning the
device, UNPLUG IT and leave it to
COOL for at least 2 hours. It is best to clean the device
BEFORE use.
PLEASE NOTE: Only rinse the device with water. NEVER
use products for descaling or any other chemical
products.
MAINTENANCE OF DMS STEAMER AND
GUARDS
• Remove the Textile-Guard or Surface-Guard after each
use.
• Use a Laurastar soleplate cleaning mat (available on
our online store or from an ofcial Laurastar retailer)
to wipe the dust, material and humidity residues
accumulated between the Guard and the aluminium
soleplate (D). Let the DMS Steamer dry out to avoid any
risk of corrosion.
STORAGE
L
K
M
beep
N
P
A
B
0 cm
C
D
2 hrs.
EN
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laurastar Izzi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laurastar Izzi in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info