778223

Laurastar Izzi Manual

4
Zoom out
Zoom in
Previous page
1/40
Next page
- 7 - - 8 -
Protective Guard installation
(Textile-Guard and Surface-Guard)
• Take the DMS Steamer (2) in your hand (H).
PLEASE NOTE: Before starting to use the device or after
an extended break, press the steam button 2 or 3 times
(8) away from any surfaces or people (I). This is to drain
any condensation from the aluminium soleplate and
prevent water marks on fabrics or surfaces.
• Check that the installed Guard is the right one for your
use purpose and keep the other Guard within easy reach.
• Place the front of the DMS Steamer (2) rst at the front of:
- the Textile-Guard (15) if you want to use your hygienic
steamer on fabrics,
- or the Surface-Guard (16) if you want to use your
hygienic steamer on surfaces.
• Then lower it to attach the back of the Guard (J).
PLEASE NOTE: You may remove from the DMS Steamer
and change the guard while it is still hot.
CAUTION: The aluminium soleplate may be hot. Do
not leave the DMS Steamer in direct contact with
the material without any Guard as it may melt or burn it.
START UP AND STEP BY STEP
Installing your Laurastar hygienic steamer
• Remove the unit from the box using the handle (14) and lay
it down on a at, stable, heat-resistant surface (A).
Installing your lter cartridge
• Remove the packaging foil.
• Place the cartridge in the compartment at the bottom of
the water tank (C).
Use the supplied lter cartridge to fully enjoy your
Laurastar device for longer.
Filling the water tank
• Lift up the lid of the water tank, then remove it by pulling on
the lid (B). Fill it with tap water (D).
• Reinsert the water tank with the lid up, then close it.
What water should you use?
Your Laurastar hygienic steamer has been designed
to work with tap water (D).
For easier mobility of your hygienic steamer
around the house, use Laurastar IZZI CART
(available on our online store or from an ofcial
Laurastar retailer).
NOTE: Never use additives (e.g. scented water),
water containing chemicals or water collected
from the tumble dryer, as these products will interfere with
the proper functioning of your Laurastar.
DANGER! KEEP OUT OF THE REACH OF
CHILDREN. DO NOT DRINK THE FILTERED
WATER.
WARNING: The water tank MUST be lled with
water for the device to work.
INSTALLATION
Turning on your device
• Plug in the electric plug (E).
• Press on the main switch (5), the white indicator light
will ash for 3 to 6 minutes (F).
• When the white light stops ashing, the device is ready.
PLEASE NOTE: For your comfort and safety, Laurastar
hygienic steamer switches off after 10minutes of
inactivity (G).
PLEASE NOTE: Heating up the device without
water may damage it and will invalidate the
warranty of your device. Do not direct the steam
towards people or animals.
E
10 min.
x2-3
3-6 min.
F
G
H
I
J
D
A
C
B
EN
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laurastar Izzi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laurastar Izzi in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info