488479
56
Zoom out
Zoom in
Previous page
1/58
Next page
Troubleshooting
52 Korg 1212 I/O
English
Card stops, audio squeals, or channels shift (Windows 95)
The 1212 I/O card relies on being able to transfer small amounts of data
across the PCI bus at regular intervals (roughly 12,000 times per second). If
other devices tie up the PCI bus for extended periods of time, this can
prevent the 1212 I/O from completing a transfer before the next scheduled
transfer.
If this happens, the audio stream will be corrupted. The audible effects of
this corruption will be manifested in one of the following ways:
a. The card may detect the condition and stop playback.
b. The audio channels may shift. For example, audio destined for the left
analog output may instead appear on ADAT channel 7.
c. A high pitch squeal may be heard in one or more of the outputs.
In our experience, most of these situations are the result of interactions
with video cards that tie up the PCI bus for extended periods of time. Some
possible solutions are listed below.
Try adjusting the acceleration settings of other devices on the PCI bus.
Try swapping the 1212 I/O with other PCI cards. In some instances
(depending upon the PCI BIOS of your PC), placing the cards in new
locations will change their assigned priorities on the PCI bus.
If you have a Matrox Millennium or Mystique video card, do the following:
1. Add the following two lines to your system.ini file.
[mga.drv]
PCIChipset=1
2. Disable the Use PowerGDI acceleration feature in the Advanced
Matrox setup (Control Panel->Display Properties->MGA Settings-
>Advanced->Performance).
If you are using another PCI video card, try installing the standard
Windows 95 VGA driver. If the problem goes away, then there is an
interaction with that card’s video driver. If this is the case, contact the video
card’s manufacturer. They may have an updated driver or a switch similar
to the Matrox above that addresses the problem.
Timecode Synchronization
Digital audio program repeatedly tries to locate, but does not remain
locked
In Deck, try increasing the SMPTE Pre-Roll time; insufficient Pre-Roll
settings may cause locates to fail. In general, this should be a minimum of 4
seconds. When playing back a large number of tracks, you may need to
increase the Pre-Roll time.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info