488479

Korg SoundLink DRS 1212 I-O Manual

57
Zoom out
Zoom in
Previous page
1/58
Next page
Troubleshooting
Korg 1212 I/O 53
English
Make sure that all word clock settings are correct for all connected
hardware and software, including ADAT-compatible multitracks, digital
mixers, S/PDIF devices, and digital audio software.
In Deck, is Trigger Sync turned on (in the Options menu)? Deck requires
that Trigger Sync be enabled when working with ADAT timecode.
In the MacOS, Is AppleTalk turned off? AppleTalk should be turned off
whenever using timing-critical music applications.
Digital audio program does not sync at all
Make sure that the 1212 I/O is selected as the timecode source. In Deck,
this is set by the Time Code Source sub-menu in the Options menu.
Is the ADAT sync/Word Clock breakout cable securely connected to the
1212 I/O? Try re-seating the cable in the jack.
Is the ADAT’s sync output securely connected to the 1212 I/O’s ADAT
Timecode Conditioner (ATC), and is the ATC securely connected to the
breakout cable?
If the digital audio program’s word clock source is set to ADAT, is the
ADAT’s optical output connected to the 1212 I/O’s optical input? The
optical cable must be connected in order for the 1212 I/O to use its word
clock.
If you are using an original ADAT without a BRC, is the digital audio
program’s word clock set to ADAT? Original ADATs must be the word
clock master when using ADAT timecode. In Deck, word clock source is set
by the Sync Mode parameter, in the Options menu Hardware
Configuration dialog.
Is the ADAT’s pitch-shifting feature being used? When the sample rate is
set to 48kHz (the only setting for the original ADAT), keep the ADAT’s
pitch setting between -300 cents and +13 cents. When the sample rate is set
to 44.1kHz, keep the pitch setting between -170 cents and +160 cents.
If you are using the Word Clock input as the word clock source, is the
frequency of the master device between 40kHz and 48.4kHz? The 1212 I/O
requires that the sample rate be within this range.
… 57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Korg SoundLink DRS 1212 I-O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info