Manual Korg SoundLink DRS 1212 I-O (page 54 of 58) (English)

488479

Zoom out

Zoom in

1/58

Troubleshooting

50 Korg 1212 I/O

English

Audio

Audio has pops and clicks

The same audio sounds different between ADAT, S/PDIF, and Analog

inputs or outputs

ADAT or S/PDIF inputs or outputs sound distorted

Make sure that the word clock settings are correct for all hardware and

software, including ADAT-compatible multitracks, digital mixers, S/PDIF

devices, and digital audio software.

Audio playback is very slow and low-pitched

If the digital audio program’s word clock source is set to S/PDIF•Word

Clock (in Deck, this is called “Digital”), is there a device connected to the

1212 I/O’s S/PDIF or Word Clock input?

If the digital audio program’s word clock source is set to ADAT, is there a

device connected to the 1212 I/O’s ADAT optical input?

If the connections are correct, is the S/PDIF, Word Clock, or ADAT device

turned on? Note: Some early DAT players may not output S/PDIF word

clock when stopped.

If Deck is running at the same time as another 1212 I/O-compatible

application, Deck does not automatically reset the 1212 I/O’s sample rate,

clock source, or analog input level when switched to foreground. To reset

the card to match Deck’s settings, go to the Hardware Conﬁguration dialog

box, and press OK.

Audio playback is slightly slow, or slightly fast

When you record or play back audio data using external clock sources

(such as the S/PDIF, ADAT, or Word Clock inputs), the sample rate is

controlled entirely by the external source, and not by the digital audio

program’s sample rate parameter. Because of this, you must make sure that

the external clock source is actually set to the same sample rate as the

digital audio program. If the two are different, it can result in audio playing

back faster or slower than expected.

For instance, let’s say that you have recorded audio from an ADAT, with

both the ADAT and the digital audio program set to 44.1kHz. Later, you

play back the same audio - but the ADAT’s sample rate has been changed

to 48kHz. In this case, the 44.1kHz audio data will be played back at

48kHz, resulting in faster, higher-pitched playback. If you change the

ADAT’s sample rate back to 44.1kHz, that audio will play back normally

again.

When recording, it is even more important to make sure that the digital

audio program’s sample rate parameter matches the actual sample rate of

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Korg SoundLink DRS 1212 I-O in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Korg SoundLink DRS 1212 I-O

Korg SoundLink DRS 1212 I-O User Manual - German - 67 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Korg SoundLink DRS 1212 I-O Manual

Product: