533078

Konig CMP-WNROUT20 Manual

3
Zoom out
Zoom in
Previous page
1/75
Next page
3
Chapter 3: How to Login to the Router
3.1 How to Set the Network Configuration
1. On your computer desktop right click “My Network Places” and select “Properties”.
2. Right click “Local Area Network Connection” and select “Properties”.
3. Select “Internet Protocol (TCP/IP)” and click “Properties”.
4. - Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the
configuration.
- Or select “Use the following IP address” and enter the IP address, subnet mask, default gateway as follows: IP
Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1. Certainly you need to input the DNS server address provided by your ISP. Otherwise, you can
use the router’s default gateway as the DNS proxy server. Click “OK” to save the conguration.
3.2 Login to the Router
1. To access the router’s web-based interface, launch a web browser such as Internet Explorer or Firefox and enter the
router’s default IP address, http://192.168.0.1. Press “Enter”.
2. Input the “admin” in both User Name and Password. Click “OK”.
Chapter 4: Quick Setup Guide
4.1 Setup Wizard
Here is the “Welcome to Setup Wizard” for conguring your Router quickly. Click “Next”.
In this screen, select one mode of your Internet connection you use. If you are not clear, press the “Detect” button or
contact your Internet Service Provider, and click “Next”.
ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP, and click “Next”.
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means your IP address keeps changing every time you connect. You do not
need to enter the information like other modes. Click “Next” and “Save” to nish the setting.
Static IP
In this screen, ll the network address information from your ISP in the IP Address, Subnet Mask, Gateway and Primary
DNS server elds and click “Next”.
L2TP
Consult your ISP for the required information.
Chapter 5: Advanced Settings
5.1 LAN Settings
LAN Settings are for the basic TCP/IP parameters of LAN ports.
•
IP Address: The Router’s LAN IP addresses (not your PC’s IP address). 192.168.0.1 is the default value.
•
Subnet Mask: Shows the router’s subnet mask for measurement of the network size. 255.255.255.0 is the default
value.
IMPORTANT:
Once you modify the IP address, you need to remember it for the web-based utility login next time.
5.2 WAN Settings
After you have selected the ISP connection type in “Setup Wizard” and you want to modify the related settings, here you
can modify and congure the settings in details.
Static IP
If connection mode static IP is selected, you can modify the following address information.
•
IP Address: Here enter the WAN IP address provided by your ISP.
•
Subnet Mask: Enter the WAN subnet mask here.
•
Gateway: Enter the WAN gateway here.
•
Primary DNS Server: Enter the primary DNS server provided by your ISP.
•
Secondary DNS Server: Enter the secondary DNS.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig CMP-WNROUT20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig CMP-WNROUT20 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info