533078
2
Zoom out
Zoom in
Previous page
1/75
Next page
2
ENGLISH
Chapter 1: Introduction
1.1 LED Indicator and Port Description
Front Panel and LED Indicators
LED indicator description on front panel: (from L to R)
POWER
When turns green, always ON indicates the power is connected.
SYS
When turns green, ashing indicates the system runs well.
WPS
When ashing, it indicates the device is communicating with client in WPS mode.
WLAN
Wireless signal LED indicator. When turns green, ashing indicates the wireless function is enabled.
LAN (4,3,2,1)
Wired local network LED indicator. Always ON indicates it is connected with Ethernet device; ashing indicates the
device is transmitting and/or receiving data.
WAN
Wide area network indicator. Always ON indicates the Router’s W.
Rear Panel
Rear Panel: (From L to R)
POWER
The jack is for power adapter connection. Please use the included 9V DC power adapter.
WAN
A 100Mbps Ethernet port, can be connected with MODEM, switch, router and other Ethernet device for Internet
connecting to DSL MODEM, cable MODEM and ISP.
LAN (1, 2, 3, 4)
4 10/100Mbps Ethernet ports can be connected with Ethernet switch, Ethernet router and NIC card.
RESET
The system reset button. Press this button for 7 seconds, the settings congured in this device will be deleted and it
will restore the settings to default.
WPS
Press for 1 second, the WPS feature will be enabled and WPS indicator will be ashing.
Chapter 2: Hardware Installation
2.1 How to Install the Router
Step 1: Please use the included power adapter to power on the Router. IMPORTANT: Use of a different power adapter
could cause damage and void the warranty for this product.
Step 2: Please connect the LAN port of the Router to the network adapter of your computer via cable.
Step 3: Please connect your broadband line provided by your ISP to the WAN port.
Step 4: Insert the included CD-ROM into the CD-ROM drive, double click the “Setup” icon and follow the instructions
to complete the installation. Or you can enter the router’s web page to configure. (More details please refer to
Chapter 3.)
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Konig CMP-WNROUT20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Konig CMP-WNROUT20 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info