Manual Ketron SD1 (page 62 of 140) (English)

677867

Zoom out

Zoom in

1/140

ASSIGNING TIMBRES TO THE TRACKS

For the lead tracks (Bass, Chord 1, 2, 3, 4 and 5) the timbres of the GM bank can be used and of the USER VOICE bank for those you have creat-

ed yourself and of the RAM/FLASH bank for any samples loaded in RAM for the lead tracks. Timbres achieved using Drawbars cannot be used.

Select a lead track using the CURSOR +/- push buttons.

For the timbres in GM, select the timbre to be assigned using the VOICES push buttons. Use the PAGE +/- push buttons to call up the groups

of timbres and the function push buttons to select the sound.

For the User Voices, enable the USER VOICE, use the PAGE +/- push buttons and select the timbre using the relative function push button.

For the audio files loaded in RAM, enable the RAM/FLASH push button and use the function push buttons to select the relative sound.

The Drum 1 and 2 tracks are dedicated to the exclusive use of the Drum Sets and, only for Drum 2, also for the Live Drums derived from grooves

and for the sampled or imported loops (file .WAV).

For the Drum 1 track you can only select the pre-set Drum Sets and the User Drum Sets.

Select the Drum 1 track using the CURSOR +/- push buttons.

Enable the DRUM SET push button and, using the VOICES, PAGE +/-push buttons and function push buttons, assign the new Drum Set to the

track.

Select the Drum 2 track using the CURSOR +/- push buttons.

To use a Drum Set enable DRUM SET. The pages from which the selection is made are no longer six but eleven. Once you exceed the sixth

group of Drum Sets, the Live Drums appear that are derived from the grooves from which that preferred is to be selected.

To assign a sampled loop to Drum 2, enable RAM/FLASH and then select a loop with the suitable characteristics that has been previously loaded

in the memory (see the appendix of the Manual).

DESCRIPTION OF THE PARAMETERS

F1 Section: Once F1 has been pressed using the VALUE +/- push buttons call up the Section to be recorded or reproduced. The order

order of appearance is: Arrange A, B, C, D, Fill In 1, 2, 3, 4, Intro 1, 2, 3, Ending 1, 2, 3, To End. Before starting the regis-

tration it is a good rule to always make sure that the Section on which you are working is really that desired to avoid

confusion.

F2 Solo: When this function is enabled (√), only the track selected at the time will be reproduced in Play mode.

F3 Tonality: This is used to establish which tonality the Section being recorded refers to, between Major, Minor, Seventh and com-

binations of the three. In this way you can create completely different arrangements because of the various combina-

tions of tonality. To simplify the recording phase it is also possible to record a section only in Major leaving it up to the

SD1 to extract the various versions of minor and seventh. To do this select “M.m.7th” for Tonality and record the sec-

tion with an arrangement in Do major.

F4 Metronome: When enabled (√), the SD1 will use a Stick sound to beat the tempo.

F5 Save: This is used to save the modifications permanently in hard disk.

F6 Value Quantize: In registration mode it may be handy to take the notes to a temporal grid, the value of which can be modified using the

VALUE +/-push buttons. The lack of Quantize is pointed out by “Real”, whereas maximum Quantize has a value of 2.

The letter “T” indicates values arranged in triples.

F7 Quantize: While F6 Value Quantize works during registration, this function can be used to quantize the notes even after the reg-

istration. Having chosen the track, establish the Quantize value using F6 Value Quantize and then press F7 Quantize

to quantize the notes recorded.

SD1 Owner’s Manual

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ketron SD1 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ketron SD1

Ketron SD1 User Manual - German - 156 pages

Ketron SD1 User Manual - French - 140 pages

Ketron SD1 Additional guide - All languages - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ketron SD1 Manual

Product: