656268
39
Zoom out
Zoom in
Previous page
1/41
Next page
PELLET BURNING STOVES
INSTALLATION AND MAINTENANCE MANUAL
39
7 The fire put out and
power is off automatically.
The hopper is empty.
No fuel feed.
The fuel feed is too little.
low temperature switch
(30˚C) is wrong.
Set temperature is reached
Put fuel into the hopper. refer to (2)
Lower the speed of combustion fan
Cool the stove at least 1 hour then operate again or change the low
temperature switch (30˚C).
"ECO" its normal, waiting, after the temperature is blow set on, it
will automatically switch on again
8 The blower still works
after the stove is cool and
fuel feed stops.
The low temperature switch
(30˚C) is broken.
Change this switch.
9 no enough heat wind Unqualified fuel
Blower speed is too high.
Heat exchange tubes are
dirty.
Use the standard specially pellet.
Use higher power
Clean the heat exchange tubes.
10. Showing "Pressure Erro"
on the display
Vent pipe is blocked
The door is opening
The are some leakages
Shut down the stove, check the venting pipe
Close the door and unplugged then restart
Check it and repair it.
Adjust the combustion fan's speed up to offer more pressure in the
stove
NO increase in temperature
with stove in operation
1. Incorrect combustion
adjustment.
2. boiler/system dirty
3. Insufficient stove power.
4.poor pellet quality
1.check recipe and parameters.
2. check and clean the boiler
3.Check that stove is properly sized for the requirements of the
system.
4. Use Hanks pellets.
Condensation in boiler 1. Incorrect temperature
setting.
2.Insufficient fuel
consumption.
1. set the stove to a higher temperature.
2.check the recipe and/or technical parameters
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Just Fire NB-B24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Just Fire NB-B24 in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info