656268
38
Zoom out
Zoom in
Previous page
1/41
Next page
PELLET BURNING STOVES
INSTALLATION AND MAINTENANCE MANUAL
38
the connection between
motor and auger
Or the auger might jump out
No fuel in the hopper. Fill the fuel into the hopper.
B. For the second stage It is normal Please be patient
C. Regarding to the last
stage
Feed unit is blocked. Check the auger is blocked or not.
There is the problem about
the connection between
motor and auger
Check the fasten screw between auger and motor loose or not.
Or the auger might jump out
No fuel in the hopper. Fill the fuel into the hopper.
4. Feeding not properly
A. too much wood pellet
and cannot burned in time
The level of feeding speed is
too high
Adjust the combustion fan's speed up
B. The fire is off due to little
wood pellet can be burned
The level of feeding speed is
too low
Adjust the combustion fan's speed Down
5 After ignition the power is
off 15min later.
Pellet feeder unit is off or
pellet is too little.
30˚C temperature switch
breaks or the connection
wires of switch loose.
Not enough pressure in the
stove
Check the pellet feeder unit and restart.
Check the connection wires or change the 30˚C temperature switch.
Adjust the combustion fan's speed up
6 orange and lazy fire,
piled pellet, carbon on the
glass
Lack of air intake for
burning.
Clean the block in gate bar.
Check the door and window glass gasket sealed or not.
Check the air intake pipe and venting pipe blocked or not, and clean
it. Change to the big diameter pipes if pipes are too long to affect
combustion.
Adjust the combustion fan's speed up
Call the dealer to reset the program
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Just Fire NB-B24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Just Fire NB-B24 in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info