28356
102
Zoom out
Zoom in
Previous page
1/148
Next page
101
Section 3 Operation
MAGNETIC CORR. (Correcting the magnetic compass)
•In this menu, you can set a correction value for the magnetic variation
automatically (AUTO) or manually (MANUAL). The readout of the
bearing will be the sum of the input bearing data and the correction
value. You can select AUTO or MANUAL for setting the correction
value. For example, enter E7.0° as the correction value when the
magnetic variation currently listed in the marine chart is W7.0°. The
correction range from 0.0 to W99.9° or E99.9°, and you can set it in
increments of 0.1°. To disable correction, select MANUAL and set the
correction value to 0.0°.
Note:
•A magnetic variation value set with AUTO is a rough value calculated
based on the current date and time, and the ships current position. You
cannot set it with AUTO if the data of the current date & time and the
current ships position is not stored. When it is necessary to set a more
precise value or when the abovementioned data is not stored, set it with
MANUAL.
RESET LOG (Resetting the trip log)
•In this menu, you can reset the LOG value to “0”. The LOG is the
sum of the navigated distances and displayed at the top of the screen
in the NAVIGATION mode. The value of the LOG is maintained
after the RADAR 1800 is turned OFF.
OPERATION
•This menu is used to set the Joystick mode, the CENTER soft key
mode, and operation guides appears or disappears.
J-STICK PUSH
•Set the joystick mode. By selecting MARK, the joystick is set as
MARK (EVENT MARK) input mode. By selecting WAYPOINT, the
WAYPOINT (EVENT WAYPOINT) input mode is set.
CENTERING
•When centering the chart screen, select the center standard.
By selecting VESSEL, the middle of the boat is used for centering; by
selecting CURSOR, the cursor is used for centering.
GUIDE
•By selecting ON, the operation guides display at many functions; by
selecting OFF, the guides not display.
OPERATION
WAYPOINT
VESSEL
ON
J-STICK PUSH
CENTERING
GUIDE
J-STICK PUSH
MARK
WAYPOINT
CENTERING
VESSEL
CURSOR
GUIDE
OFF ON
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info