28356
100
Zoom out
Zoom in
Previous page
1/148
Next page
99
Section 3 Operation
DEPTH IN (Selecting depth data input)
•In this menu, you can select the depth data input from the external
NMEA source or OFF. When NMEA is selected, the depth data input
from the external depth gauge is displayed.
Note:
•When you input the depth data from an external water temperature
gauge, you need to connect the specified signal line to the NMEA
connector on the rear panel. In addition, be sure to check that the
NMEA0183 sentences of $xxDPT or $xxDBT are output from the
connected water depth gauge. (You can check this easily using the self test
mode of the RADAR 1800.)
COURSE IN (Selecting course data input)
•In this menu, you can select the vessel’s course data input from GPS,
GPS compass, or magnetic compass. When GPS is selected, the
course data is inputted from GPS.
Notes:
•When you select input source to GPS and you use an external NMEA
source (select NMEA at POSITION IN menu), you need to connect the
specified signal line to the NMEA connector on the rear panel. In
addition, be sure to check that the NMEA0183 sentences of $xxHDT,
$xxHDG, $xxRMC, or $xxVTG are output from the connected GPS.
(You can check this using the self test mode.)
•When you select input source to GPS COMPASS, you need to connect the
specified signal line to the DC12V/COMPASS connector on the rear
panel. In addition, be sure to check that the NMEA0183 sentences of
$xxHDT is output from the connected GPS compass. (You cannot check
this using the self test mode.)
•When you select input source to MAG, you need to connect the specified
signal line to the DC12V/COMPASS connector on the rear panel. In
addition, be sure to check that the NMEA0183 sentences of $xxHDT,
$xxHDG, $xxHDM, or $xxVHW are output from the magnetic compass.
(You cannot check this using the self test mode.)
POSITION IN (Selecting position input)
•In this menu, you can set the source of the navigation information
data such as position, course, geodetic information, etc. The RADAR
1800 provides the GPS/DGPS connector which allows a direct
connection of the DGPS212 or GPS112, and the NMEA connector
to input the NMEA0183 formatted navigational information data
from the external navigation aids. The navigational information input
from the connector selected in this item is displayed on the screen.
When GPS is selected, the navigational information input from the
GPS112 or DGPS212 connected to the GPS/DGPS connector on the
rear panel is displayed. When NMEA is selected, the navigational
information input from the external navigation aids is displayed.
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info