28356
101
Zoom out
Zoom in
Previous page
1/148
Next page
100
Section 3 Operation
MANUAL
E 0.0°
LAT/LON
MAGNETIC CORR.
RESET LOG
CALIBRATION
UNITS
FT
1.0000/m
° F
KTS/NM
DEPTH
YOUR DEPTH
TEMPERATURE
SPEED&DIST UNIT
Note:
•When you input the navigational information data from the GPS/DGPS
or the external navigation aids, you need to connect the specified signal
line to the GPS/DGPS connector or the NMEA connector on the rear
panel. In addition, after connecting the external navigation aids, be sure
to check that the NMEA0183 sentences of $xxGGA or $xxRMC are
output from the connected external navigation aids. (You can check this
easily using the self test mode of the RADAR 1800.)
NMEA OUT (Putting out data)
•In this menu, you can issue the data in the specified format.
•If you press the
Joystick
when the Radar screen is displayed in the
Radar mode and the Radar/Chart mode, the position of the cursor
($RDRSD) is output.
UNITS
•In this menu, you can select the unit of depth, temperature, speed,
and distance.
DEPTH (Selecting depth units)
•In this menu, you can select from among MT (meter), FT (feet), FM
(fathom), and SP (special). When SP is selected, the depth is displayed
with the unit you set.
YOUR DEPTH (Setting custom depth units)
•In this menu, you can specify a meter-covered value for your own
depth (SP). The unit ranges between 0.3000/m and 1.9999/m, and
you can specify it in increments of 0.1 millimeter.
TEMPERATURE (Changing temperature units)
•In this menu, you can select the unit of water temperature between
Centigrade (°C) or Fahrenheit (°F).
SPEED & DIST UNIT (Changing speed and distance units)
•In this menu, you can select a pair of speed and distance units
between KTS & NM (knots/nautical miles), KPH & KM (kilometers
per hour/kilometers), and MPH & SM (miles per hour/statute miles).
CALIBRATION
•In this menu, you can set a calibration value for each data described
below.
LAT/LON (Calibrating the longitude/latitude)
•In this menu, you can set a calibration value for the longitude and the
latitude.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info