520197
23
Zoom out
Zoom in
Previous page
1/27
Next page
44
If the base already has the maximum number of six handsets registered, you will
need to deregister one of the existing handsets before you can register the new
handset. See section I.2. Deregister a handset or a base.
On the handset:
Enter the base PIN code.
Pre-set base PIN code is 0000.
When in standby, the new handset number will be displayed.
The handset will automatically be allocated with the next available handset
number.
If the registration is unsuccessful, the display will show “Not registered” and
you will need to follow the registration procedure again. The display will show
“searching” if the handset is registered but cannot locate the base, for example
when the base station is out of range or turned off.
I.2. Deregister a handset or a base
If you have more than one handset registered to your base or more than one base
registered to your handset(s), you can deregister both the handset from the base
or the base from the handset. Before deregistration, make sure that all handsets
and the base are in standby.
Key Map:
Add. Settings Deregister select the handset or
base select Yes
1. Press to access the main menu.
2. Press
/ to select “Add. Settings” and press
3. Press / to display “Deregister” press to confirm.
4. Press
/ to select “Handset” or “Base” and press to confirm.
5. Press
/ to select “Yes” and press
6. Press
to exit and return to standby.
I.3. Changing the PIN code
Key Map:
Setting Base Base PIN enter a new PIN code
The default Base Pin code is 0000. If you want to change to a new PIN code, follow
the above procedures while you enter a new 4 digits base PIN code.
I.4. Selecting a base
You can register the handset with up to 4 bases, e.g. one at work and one at
home or one upstairs and one in the garage, and switch between them. Once your
handset is registered with other bases, you can either specify the base you want to
use or, select “Automatic” for your handset to choose your base with the strongest
signal.
Key Map:
Add. Settings Base Select Automatic or
Base number
1. Press to access the main menu.
2. Press
/ to select “Add. Settings” and press
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jacob Jensen 10 DECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jacob Jensen 10 DECT in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info