520197

Jacob Jensen 10 DECT Manual

22
Zoom out
Zoom in
Previous page
1/27
Next page
43
H.1. Setting Ringer Volume & Ringer Type
Different ringer volumes and ringer types can be programmed to each handset.
Handset Ringer Volume
Key Map:
Audio Setting Ringer Volume select the volume
1. To arrive at this menu, push in standby mode, and use / to
start browsing until “Audio Setting” is shown on the screen. Press
2. Press / to select “Ringer Volume” and press
3. Press / to select the volume you want. (you will hear a sample of
each as you scroll through), then press to confirm.
4. Press
to exit and return to standby. If you select Volume “Off”, will be
displayed.
Handset Ringer Type
Key Map:
Audio Setting Ringer Type select the option
select the ringer type
1. To arrive at this menu, push in standby mode, and use / to
start browsing until “Audio Setting” is shown on the screen. Press
2. Press / to select “Ringer Type” and press
3. Press / to select the “External”, “Internal”, “Paging”, “Alarm”, or
“Appointment” and press to confirm.
4. Press
/ to select the melody you want. (you will hear a sample of
each as you scroll through), then press to confirm your selection.
5. Press to exit and return to standby.
I. ADVANCED OPERATION
Special Attention!!
The following sections are only for users who are familiar with electronics
products. Failure in following steps correctly may stop your DECT phone from
normal operation.
I.1. To register a new handset
When you register a new handset to your base, you will be asked to enter your
base PIN code. To enable registration mode on the base unit, press and hold the
PAGE button for five seconds. Before registration, make sure the new handset is
fully charged and that you have the base and the handset in front of you. Also,
make sure that all handsets and the base are in standby.
On the handset you want to register:
Key Map:
Add. Settings Register select the base number
1. Press to access the main menu.
2. Press
/ to select “Add. Settings” and press
3. Press / to display “Register” and press to confirm.
4. Press
/ to select your base number and press to confirm.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jacob Jensen 10 DECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jacob Jensen 10 DECT in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info