554896
5
Zoom out
Zoom in
Previous page
1/12
Next page
Telephone dialer TD-101 / TD-101W - 20 - MDJ512 10 Telephone dialer TD-101 / TD-101W - 5 - MDJ512 10
11. Examples of TD-101(W) use
The dialer inputs are separated with optocouplers, so the variety of possible connections is really
wide. The following examples are only for your reference. Other connections and settings are also
possible to meet your requirements. Ask you distributor if you need any advice regarding the TD-101
installation or programming.
11.1 Trigger inputs IN1 and IN2 connection
The input optocoupler is switched on, if its voltage is from 5 to 20V, minimal trigger signal duration
must be 0.1 sec.
normally open triggering with
contacts triggering switching transistors to GND
(for normally closed contacts
select opposite logic of the IN inputs)
combined triggering one voice message only
ARM = arming of alarm system (20 seconds)
siren = alarm in the system (N.C. or NO. contact
(typical for use with monitoring station) trigger - selectable)
11.2. Use of the dialer only for emergency dialing (old or ill people)
Connect the dialer to the telephone line (between the wall plug and the telephone set). Use an adapter
with output voltage 12VDC, min. 100mA to power the dialer (wire the adapter to +12V and GND terminals,
mind the polarity).
Enter the user mode (see chapter 6.) to program the telephone numbers for the voice message to
memories
Mem3 and Mem4. You can also program a Pager number & data which should be displayed
to memory
Mem6. Then record voice message no. 2 and return to the stand by. Now the dialer is ready for
emergency calls.
It can be triggered with the
Fkey (use an adhesive sticker to make it more visible). Model TD-101W
can also be triggered by remote control. An additional push button (installed by the patient’s bed for
example) can be wired to the dialer input IN2 (see the first diagram above - normally open contact
trigger).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron TD-101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron TD-101 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info