554896

Jablotron TD-101 Manual

3
Zoom out
Zoom in
Previous page
1/12
Next page
Telephone dialer TD-101 / TD-101W - 3 - MDJ512 10
Conformity:
Hereby, Jablotron Ltd., declares that this TD-101(W) is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. Original of the conformity assessment can be
found at the web page www.jablotron.cz
, section Technical support.
Notes :
Although this product does not contain any harmful materials we suggest you to return the product to
the dealer or directly to the producer after usage.
1. Description
The TD-101 is an automatic dialing device that transmits prerecorded information via the telephone line.
The dialer can send two different 10 second voice messages (or one 20 second message) to four phone
numbers. It can also send two different Numeric messages to two different PAGERS and four digital codes
to a monitoring station. The desired type of communication is easily selected during installation.
The dialer has two trigger inputs. The optional model TD-101W can also be triggered remotely with a
wireless remote control.
There are three levels of operation for the TD-101: standby, user, and installer. Three light emitting
diodes on the front of the TD-101 show what level the dialer is in.
In standby mode the TD-101 waits for an input from either of the trigger inputs or from the built in keypad.
At the user level (accessible with User Code) you can enter and delete phone numbers, change the
voice messages, change the user code, or test that the TD-101 is functioning properly. Model TD-
101W can also "learn“ a remote control code in this level.
At the installer level (accessible with Installer Code) you can modify optional functions of the dialer
and enter data for digital communication with a monitoring station.
All data is stored in the TD-101's EEPROM memory. So disconnecting the power from the dialer will not
erase the data. An emergency reset feature can return the dialer to its original factory settings when
necessary.
The autodialer takes priority on your telephone line. When triggered, it will switch all other devices
(phone, fax, PABX) off line. By checking signals on the line (dial, busy or ringing tone) the dialer knows
what its next response should be. A built in speaker can be used as an audible monitor of the dialer
function. The telephone line is electrically separate from the power and trigger inputs. The TD-101 has
specially designed circuits to protect your telephone line from lightning strikes overvoltage. Tamper
protection is also provided.
1.1. Possibilities of use
The TD-101 dialer has a wide spectrum of use:
• property protection - connected with a house alarm system it can send not only an alarm
message, but also arm/disarm information or panic signal
• emergency calls - ill or old people can easily call a doctor or relatives for help using the TD-101.
The dialer can be triggered by pressing the
F key, or by an additional push button wired to the
input. Model TD-101W can also be triggered with a wireless remote control.
• technical information sending - the dialer can automatically report failures of crucial devices
(refrigerator, cooling systems, pumps, heating systems, elevators etc.) or in connection with a
suitable sensor it can inform about reaching of a critical level of controlled parameters
(temperature, humidity, water level etc.).
2. Specifications
operating voltage 12VDC (10-14V)
current consumption stand by 15 mA max.
operating 100 mA max.
trigger inputs IN1 & IN2 separated with optocouplers
option TD-101W also wireless
tamper switch 1A / 60V max.
telephone line electrically separated, over voltage protection
dialing method pulse / tone
phone number Memories voice message 4x 16 digits (Mem1-4)
pager 2x 26 digits (Mem5,6)
monitoring station 2x 16 digits (Mem7,8)
phone line signal detection dialing, busy or ringing tone
voice message duration 2x 10 or 1x 20sec.
monitoring station protocols ADEMCO, SILENT KNIGHT, SESCOA, FRANKLIN, DCI,
VERTEX, RADIONICS, DTMF 1400, DTMF 2300
can be connected to analogue interfaces TBR 21/1998, EG 201 121 V1.13/2000, AS/ACIF S002/2001
(Australia)
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron TD-101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron TD-101 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info