631258
5
Zoom out
Zoom in
Previous page
1/8
Next page
JA-82Y user manual - 5 - MLD51300
Example: If an alarm has been triggered, the communicator will reply to the SMS instruction
4321 MEMORY by reporting:
Report from your alarm: Last events: Unsetting, Master code, Alarm cancelled by user,
Master code, Delayed alarm, 02: Device
6. Controlling appliances by SMS
You can send SMS instructions to switch on/off communicator or control panel outputs. Up to 2
appliances can be attached (device X and device Y – see the corresponding table in the control panel
user manual). The communicator will reply with an SMS message to confirm performance of the
instruction.
To switch device X on send the following SMS: xxxx_PGX_ON
To switch device X off send the following SMS:
xxxx_PGX_OFF
To switch device Y on send the following SMS: xxxx_PGY_ON
To switch device Y off send the following SMS:
xxxx_PGY_OFF
where: xxxx is a valid access code (user or master)
_ is a space character
Example: If the heating in your house is operated as the X device, you can switch the heating on by
sending xxxx PGX ON.
7. SIM card credit interrogation xxxx_CREDIT
If a prepaid SIM card is used in the communicator you can check the credit balance.
Send an SMS message containing: xxxx_CREDIT
where: xxxx is a valid access code (user or master)
_ is a space character
Example: The xxxx_CREDIT request is responded to by the following message:
Report from your alarm: Credit: Current balance is 26.35€.
Notes:
This instruction has to be pre-configured by the installer according to GSM provider
requirements
The user is responsible for the credit balance being sufficient!
The GSM provider may have a time-limit after which the credit validity will expire!
You can find more details on this function in the communicator installation manual
Owing to the above facts, using pre-paid SIM cards is
not recommended.
8. Remote control via a telephone keypad
If you want to operate the alarm system via a phone (mobile or landline), perform the following:
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-82Y GSM communicator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-82Y GSM communicator in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-82Y GSM communicator

Jablotron JA-82Y GSM communicator Installation Guide - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info