631258

Jablotron JA-82Y GSM communicator Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
JA-82Y user manual - 4 - MLD51300
3. Unsetting (disarming) by SMS xxxx_UNSET
The UNSET instruction allows you to unset (disarm) the system, fully or partially. If the system is
already unset, it will not change its status.
Send an SMS message containing:
xxxx_UNSET
where: xxxx is a valid access code (user or master)
_ is a space character
Example: Sending 4321 UNSET will unset the system the same way as if the code 4321 had been
entered on the system keypad.
Notes:
• As a factory default, unsetting (disarming) by an UNSET instruction is confirmed by the system via
an SMS reply.
• When the current system status does not allow system operation (e.g. when in programming mode),
you will be notified about the situation via an SMS reply.
• In a split system, an xxxx_UNSET instruction will only have an effect on the section to which the
code xxxx belongs.
4. Status interrogation xxxx_STATUS
The STATUS instruction allows you to get information about the current system status. The
communicator will reply with an SMS reporting the current set/unset status, GSM signal strength,
GPRS connection status and transmission success/failure status for each ARC involved.
Send an SMS message containing:
xxxx_STATUS
where: xxxx is a valid access code (user or master)
_ is a space character
Example: If the system is set, an SMS instruction 4321 STATUS will be replied by the system via
an SMS message which might look like the following:
Report from your alarm: System status: Set, GSM: 80%, GPRS OK, MS1 OK, MS2 OK,
MS3 OK.
where GSM: 80% means the GSM signal strength, GPRS OK means communication via GPRS
has been successfully established and MS1 OK, MS2 OK, MS3 OK means that all relevant data has
been transmitted to monitoring stations MS1, MS2 and MS3.
5. Last event interrogation xxxx_MEMORY
On receiving a MEMORY instruction, the communicator will reply by reporting the last 3 events
recorded in the control panel memory.
Send an SMS message containing:
xxxx_MEMORY
where: xxxx is a valid access code (user or master)
_ is a space character
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-82Y GSM communicator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-82Y GSM communicator in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-82Y GSM communicator

Jablotron JA-82Y GSM communicator Installation Guide - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info